Wilcom PS-11-I2 POTs Splitter-ADSL POTS Splitter-Pots Splitters- POTS Splitter Supplier-POTs Splitters

American Tech Supply carries the entire line of Wilcom's PS-11-I2 POTs Splitter,ADSL POTS Splitter, Pots Splitters, POTS Splitter Supplier and a variety of other POTs Splitters. The Wilcom PS-11-I2 POTS Splitter is a passive low-pass filter designed to provide POTS service in concert with ADSL technology. The device blocks high frequency (20kHz - >1MHz) energy from interfering with POTS equipment. The PS-11-I2 employs a low-pass filter for standard voice-grade lines.

The Wilcom PS-11-I2 POTS Splitter is unique because of its convenient mounting location inside the Network Interface Device (NID). The PS-11-I2 is similar in size to a standard station protector and mounts on the Telco side inside the Network Interface Device. The terminal strip allows for easy installation so the installer can simply connect the existing premise wiring to the PHONE terminals on the splitter, and have POTS service up and running within minutes without expensive, and time-consuming rewiring. ATU-R terminals connect directly to the ADSL equipment with existing cable. (Data-grade cabling is recommended for new installations.)

Compatible with ADSL coding schemes
The PS-11-I2 POTS Splitter is compatible with all ADSL
coding schemes

• Meets ANSI T1.413 -1998 & ITU-T G.992.1/.2
  The PS-11-I2 Master POTS Splitter is compliant with the requirements of both ANSI T1.413-1998 Annex E; ITU-T G.992.1/G.992.2 Annex E.2 Type 2 (North America)
  
• Passive Low Pass Filter
  Passive filter design for continuous phone service in the event of an AC power failure
  
• Unique Footprint
  The PS-11-I2 is similar in size to a standard station protector allowing direct installation into a wide variety of manufactured Network Interface Devices.
  
• Convenient Mounting
  The PS-11-I2 POTS Splitter is unique because of its convenient mounting location in the Telco side of the Network Interface Device.


• Unlimited ADSL Bandwidth
  Full bandwidth allocation as compared to a "micro-filter".
  This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA.

PS-11 NID POTS Splitter	PS-11 Ring Trip Mitigator	PS-11v NID POTS Splitter
PS-55 MDx 24 Port Wall Mount POTS Splitter	PS-20 ETSI POTS Splitter	PS-21 ISDN POTS Splitter
PS-4101 1U Shelf	PS-4103 3U Shelf	PS-4401 1RU-96 Port Shelf
PS-4100 24 Port Splitter Card	PS-15 Wall-mount POTS Splitter	PS-4401 1RU-96 Port Shelf

 

ADSL-DSL-VDSL Products

POTS SplitterThe Wilcom PS-20 ETSI POTS Splitter is designed to provide POTS service in concert with ADSL technology. The device blocks high frequency (20kHz-1MHz) energy from interfering with POTS equipment. The PS-20 employs a low-pass filter for standard voice-grade lines.

PS-11 NID ADSL Shelf. This PS-4101 1U Shelf is 1.75" tall and design to be equipped with up to two (2) ADSL2+ Splitter cards for a total of 48 ports. The shelf can be mounted in 19 or 23 inch racks by using the unique designed rack adapters. The wide spectrum of operation makes this shelf ideal for ADSL2+ deployment. Also this shelf delivers excellent port-to-port cross talk isolation making it an excellent ADSL splitter product for video deployment. Its' small foot print design makes it an excellent product for remote applications.

ADSL and POTS Coexist- 24 Port splitter Card The PS-4100 series provide standard POTS service in concert with ADSL technology by blocking high-frequency ADSL energy from interfering with POTS equipment.

The Wilcom PS-11-I2 POTS Splitter is a passive low-pass filter designed to provide POTS service in concert with ADSL technology. The device blocks high frequency (20kHz - >1MHz) energy from interfering with POTS equipment. The PS-11-I2 employs a low-pass filter for standard voice-grade lines.

This PS-4103 3U Shelf is 3 EIA rack units tall (5.25") and design to be equipped with up to six (6) ADSL2+ Splitter cards for a total of 144 ports. It is one of the industries highest density shelves with the smallest foot-print for mounting into 19 inch racks. The shelf can be mounted in 19 or 23 inch racks by using the unique designed rack adapters. The wide spectrum of operation makes this shelf ideal for ADSL2+ deployment. Also this shelf delivers excellent port-to-port cross talk isolation making it an excellent ADSL splitter product for video deployment. Its' small foot print design makes it an excellent product for remote applications.

Wilcom’s PS-4401 1RU-96 Port Shelf is the industries highest density ADSL2+ POTS splitter in a one rack-unit design. This 96 port 1 RU design along with Wilcom’s proven performance makes it the perfect Central Office splitter. The high-density, temperature hardened splitter also has the addition of common mode protection creating the perfect splitter for remote cabinets

 

Call One Of Our Friendly-Knowledgeable Customer Service Representatives Today!