Signamax, Signamax C6A-114CC-3FB, Category 6A 10G UTP Patch Cords, Signamax Patch Cords, Cable & Cable Assemblies, Category 6A Patch Cords, Signamax Category 6 Patch Cords, Category 5e Patch Cords, 110 Patch Cords, Industrial Grade Patch Cords, Telco Cable Assemblies, Modular Plugs and Accessories, Signamax Cable

Product Categories

About Us

cable, vdsl, patch

Signamax- Signamax C6A-114CC-3FB- Category 6A 10G UTP Patch Cords- Signamax Patch Cords, Cable & Cable Assemblies- Category 6A Patch Cords- Signamax Category 6 Patch Cords- Category 5e Patch Cords- 110 Patch Cords- Industrial Grade Patch Cords- Telco Cable Assemblies- Modular Plugs and Accessories- Signamax Cable

Category 6A 10G UTP Patch Cords

Signamax Connectivity Systems category 6A patch cords are designed to meet 10 Gigabit Ethernet IEEE 802.3an rev. 1.0 transmis-sion requirements, and are guaranteed to meet ANSI/TIA-568-C.2 channel performance. Cords are 100% transmission tested and support category 6A 100-meter channel performance. Assembled in a controlled environment using advanced manufacturing tech-niques to insure consistent quality these patch cords provide reliable performance when mated with our category 6A connecting hardware and deliver supreme performance for network cabling systems.

Signamax category 6A patch cords incorporate slim-profile snag-free boots, which protect the plug latch, and a flexible, but durable cable strain relief and are compatible with both T568A and T568B wiring schemes. Patch cords are manufactured using ETL-verified 26-AWG stranded cable designed for greater flexibility and service life.

SPECIFICATIONS

TRANSMISSION PERFORMANCE

ANSI/TIA-568-C.2: category 6A (1-500 MHz) specifications

TRANSMISSION MEDIA

4-pair stranded unscreened twisted pair (UTP)

WIRING SCHEME

ANSI/TIA/EIA-568-C.2: T568A & T568B
ISO/IEC 11801: 8-position conductor/pair assignment (1-2/3-6/4-5/7-8)

CORDAGE

Jacket diameter: < 6.35 mm (0.25 in)
Construction: 4 pairs, 7 strands 26 AWG, UTP,
high density polyethylene insulation,
fire retardant PVC compound jacket

PLUG

Assembly: FCC Part 68 Subpart F
Housing: UL listed 94V-0 flame retardant polycarbonate
IDC blades: phosphor bronze, min 50 μin of gold plating over 100 μin of nickel in contact area

MECHANICAL

Retention: 50 N (11 lbf) for 60±5 s
Mating cycle life: min 750 cycles
Tensile strength: ≥ 20 N per wire

ELECTRICAL

Insulation resistance: min 500 MOhm @ 100 Vdc
Dielectric withstanding voltage: 1,000 Vdc/ac peak contact to contact @ 60 Hz for 1 min
Contact resistance: max 20 MOhm

ENVIRONMENTAL CONDITIONS

Storage: -40 °C-+70 °C (-40 °F-+158 °F)
Operation: -10 °C-+60 °C (+14 °F-+140 °F)
RH (operation): max non-condensing 93 %

COMPLIANCE

ANSI/TIA/EIA-568-B.2-10, IEEE 802.3 ab, FCC Part 68 Subpart F, UL94V-0

APPLICATIONS

X.21, V.11, S0, ISDN, TR 4/16/100, 100BASE-VG, ATM LAN 25/51/155, TP-PMD, CSMA/CD 10BASE-T, 100BASE-TX, 100BASE-T4, 100BASE-T2, 1000BASE-T, 10GBASE-T

WARRANTY

5-year limited component warranty
10-year Signamax Link/Channel Warranty
15-year Signamax Extended Component Warranty
25-year Signamax Cabling System Warranty100BASE-T2, 1000BASE-T, 10GBASE-T

Patch Cords, Cable & Cable Assemblies

Signamax high performance Category 6 and 5e patching and equipment cables are offered for network, PC and cross-connect applications. These cables are used for connecting and patching to network equipment both in the wiring room and work areas.

Category 6A Patch Cords

Category 6A 10G UTP Patch Cords

Category 6A 10G Screened Patch Cords

Patch Cords, Cable & Cable Assemblies

Category 6A Patch Cords	Category 6 Patch Cords	Category 5e Patch Cords
110 Patch Cords	Industrial-Grade Patch Cords	Telco Cable Assemblies
Modular Plugs and Accessories	Cable