Product Categories

About Us

cable, vdsl, patch


Signamax- Signamax 24458S-C6A- Category 6A 10G Screened Patch Panels- Signamax Patching Systems- Signamax Category 6A 10G Patch Panels- Signamax Cattegory 6a 10g UTP Patch Panels

Signamax patch panels are offered in a variety of configurations for voice, data, audio and video distribution cabling applications for TIA/EIA Categories 3, 5e and 6. We provide users with advanced product designs and features for effective horizontal cabling.
Category 6A 10G Screened Patch Panels

Category 6A Screened Patch Panels are designed to meet 10 Gigabit Ethernet IEEE 802.3an rev. 1.0 transmission requirements and are guaranteed to exceed ANSI/TIA-568-C.2 performance specifications. These high-density panels are available in 24- and 48-port versions featuring port labeling areas and port numbering for easy circuit identification.

Panels are supplied with 10G screened connectors supporting both T568A and T568B wiring using an easy-to-read color-code wiring label. This uniquely designed connector features a tool-less termination method for quick and easy installation. A new contact design provides enhanced plug-to-jack connection integrity and is rated for a minimum of 750 plug insertions providing for the highest level of system reliability. Jacks are fully shielded to optimize protection from EMI including alien crosstalk.

Panels are provided with a newly designed cable management bar that easily mounts to the back of the panel without the need for mounting screws. This cable management bar features improved cable routing and strain relief.



ANSI/TIA-568-B.2-10: Meets or exceeds category 6A (1-500 MHz) channel specifications


Unscreened or screened twisted pair (UTP/ScTP/FTP/SFTP)


ANSI/TIA/EIA-568-B.2: T568A & T568B
ISO/IEC 11801 2nd Ed.: 8-position pin/pair assignment (1-2/3-6/4-5/7-8)


Insulation resistance: min 500 MOhm @ 100 Vdc
Dielectric withstanding voltage: 1,000 Vdc/ac peak contact to contact @ 60 Hz for 1 min
Spring wire contact resistance: max 20 Mohm
IDC contact resistance: max 2.5 MOhm
Current rating: see figure


Total contact force: min 800 g for 8 wire leads with FCC compliant 8p8c plug
Retention: 50 N (11 lbf) for 60±5 s
Mating cycle life: min 750 cycles with FCC compliant 8p8c plug


Panel: steel/Ni plated steel
Cable management bar: steel/Ni plated steel
Jack housing: screened case: copper, 0.25 mm (0.0098 in), 100 μin nickel plated
contact holder: high impact thermoplastic, UL94V-0 fire retardant
Jack contacts: phosphor bronze alloy plated with min 50 μin of gold over 70-100 μin of nickel plating
Jack IDC: 110 type, phosphor bronze alloy with 100 μin 100% tin alloy


8p8c (8-position, 8-contact) "RJ45" type


22-24 AWG (0.644 - 0.511 mm)


Panel: 19" rack mountable
1.5 in deep (w/o cable management bar)
6.0 in deep (with cable management bar installed)
1.75 in (1 RMU) high (24458S-C6A)
3.50 in (2 RMU) high (48458S-C6A)
Jacks: W 17.0 mm D 41.8 mm H 19.3 mm
W 0.67 in D 1.65 in H 0.76 in


Storage: -40°C - +70°C (-40°F - +158°F)
Operation: -10°C - +60°C (+14°F - +140°F)
RH (operation): max non-condensing 93%


ANSI/TIA/EIA-568-B.2-10, IEEE 802.3 ab, FCC Part 68 Subpart F, UL 94V-0, UL 1863, IEC 60603-7


X.21, V.11, S0, ISDN, CSMA/CD 10BASE-T, 100BASE-TX, 100BASE-T4, 100BASE-T2, 1000BASE-T, 10GBASE-T, TR 4/16/100,
100BASE-VG, ATM LAN 25/51/155, TP-PMD


5-year limited component warranty
10-year Signamax Link/Channel Warranty
15-year Signamax Extended Component Warranty
25-year Signamax Cabling System Warranty


  • Connector transmission performance meets or exceeds TIA-568-B.2-10 channel level performance specifications.
  • Termination is made quick and easy using a tool-less termination.
  • Rear cable management bar.
  • Connector contact design provides enhanced plug to jack connection integrity and protects against damage
    caused by insertion of 4 or 6 position plugs.
  • Connectors are rated for at least 750 plug insertions providing for the highest level of system reliability.
  • Maximum strength and durability construction.

Category 6A 10G Patch Panels

Patching Systems


cisco systems
Telco Systems
telecom supply






Network Connectivity

Media Converters Media Converters
Ethernet Switches Ethernet Switches
Industrial Ethernet Industrial Ethernet
SFP Interface Modules SFP Interface Modules
Optical Fiber NICs Optical Fiber NICs

Premise Connectivity

Work Area   Outlet Systems Work Area Outlet Systems
Patching Systems Patching Systems
Cross-Connect Systems Cross-Connect Systems
Patch   CordsPatch Cords
Optical Fiber Systems Optical Fiber Systems
Support Structures Support Structures

BIF-Bend Insensitive Fiber

New Bend Insensitive Fiber Jumpers

Raceway Systems- Cable Tray