Innerduct

 

 

About Us
cable, vdsl, patch

 

Smoothwall Innerduct- 1" Smoothwall Innerduct- 2" Smoothwall Innerduct-4" Smoothwall Innerduct- 6" Smoothwall Innerduct- Smoothwall Innerduct From 3/4" to 16 " In Diameter

----- -------

 

 

 

We Offer Innerduct Smoothwall from 3/4" to 16" - Minimums May Be Required- See Info

Smoothwall Innerduct

 

Zero Halogen Innerduct

Corrugated Innerduct

Plenum Innerduct

 

Maxcell Innerduct

Pull Rope

Pull Tape

Riser Innerduct

Riser Duct or Riser Innerduct is a flexible, non-metallic, corrugated raceway used for effective interior cable and fiber optic management. Riser meets UL-(1666) standards safety test for flame propagation height of electrical and optical fiber cables installed vertically in shafts. Premier also meets UL-2024 standards for safety optical fiber cable raceway- Info

 

Plenum Innerduct

Plenum Duct or Plenum Innerduct is a flexible, non-metallic, corrugated raceway used for effective interior cable and fiber optic management. r Plenum meets UL-(910) standards for the National Electrical Code, Article 770, and satisfies UL-2024 standards for low smoke and flame propagation.-Info

 

Corrugated Innerduct

Corrugated HDPE or Corrugated Innerduct is manufactured from High Density Polyethylene (HDPE) and is intended to be placed inside of existing innerduct. It’s ideal for pulls under 1000 ft. and is designed to reduce surface contact when pulling cable. This lightweight product offers maximum flexibility, and allows for installation in small or restricted areas. Info

American Tech Supply is an active SAM registered supplier for the United States Government

American Tech Supply is a a national innerduct supplier that can provide smoothwall form 2/3inch to 16 inches in diameter and awe also stock 1" smoothwall innerduct, 2" smoothwall innerduct, 3" smoothwall innerduct, 4" smoothwall innerduct and 6" smoothwall innerduct. As a national duct supplier we specialize in fast turnaraound for a Complete Line of Innerduct and Raceway Products including Innerduct, ladder rack,High Density Polyethlene Duct, Outside Plant Innerduct, HDPE, Most OSP Duct ,Plenum Innerduct,Corrugated Innerduct, Corrugated HDPE, Riser Rated Innerduct, Outside Plant Conduit, Fiber Optic duct and our custom Pre-Installed Fiber In Duct. ATS's HDPE innerduct is available in sizes ranging from 1/2" to 16" inches in diameter with several SDR or HDPE innerduct wall thickeness.

ATS stocks many sizes of innerduct and can ship most innerduct orders including custom- including colored innerduct within 48 hours. Our corrugated HDPE is manufactured from High Density Polyethylene (HDPE) and is intended to be placed inside of existing duct. Our corrugated innerduct is ideal for pulls under 1000 ft. and is designed to reduce surface contact when pulling cable. This lightweight product offers maximum flexibility, and allows for installation in small or restricted areas. Our Corrugated innerduct is available in 1" and 1 1/4". The standard color is orange and is offered in a variety of other colors. Sequential marked footage is standard. Custom options, such as multiple colors per reel and Slit Duct, are also available.

Our High Density Polyethylene (HDPE) Innerduct is made of 100% Virgin Resin. The Innerduct can be manufactured in almost any color and has outstanding UV protection. Orange, Black, Red, Blue and Green are the most common conduit colors. We can provide multiple duct and colors on one reel to maximize space in a trench. All of our Innerduct is sequencally marked every foot and can be purchased with or without pull tape. The Innderduct has a silicore lining on the inside to prevent cable drag friction. SDR wall thicknesses are contingent on the type of projects projected. Schedule 40, SDR 15.5, SDR 13.5, SDR 11 and SDR 9 are all standard wall thickness.

• Made from tough High Density Polyethylene (HDPE).
• Flexible and can be worked easily in tight areas.
• Excellent low temperature properties.
• Superior resistance to natural or mechanical damage.
• Available with sequential markings in feet or meters.• Smoothwall is available with SILICORE® Super Slick Permanent Lining.
Ribbed
Corrugated
Figure 8
Aerial
Piggyback
Pinpoint
Cablecon
Plenum (Fire Jacket)
Microduct
Accessories

Smooth Wall Innerductl Innerduct

Applicable Material Standards and Dimensional Specifications

ASTM D1248-Specification for Polyethylene Plastic Molding and Extrusion Material
ASTM D2412-Test Method for External Loading Properties of Plastic Pipe by Parallel Plate Loading
ASTM D3350-Polyethylene Plastic Pipe and Fittings Material
ASTM D2239-Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
ASTM D2447- Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on O.D.
ASTM D2737-Standard for Polyethylene (PE) Plastic Tubing
ASTM D3035-Polyethylene (PE) Plastic Pipe Based on Controlled O.D.
ASTM D3485-Smooth Wall Coilable (PE) Conduit (Duct) for Preassembled Wire and Cable
NEMA Standards Publication TC-7
NEMA Standards Publication TC-2
BELLCORE Generic Requirements for Optical Cable Innerduct and Accessories, 1995

Polyethylene SDR 13.5: Meets Material and
dimensional requirements of ASTM D3035
Nominal
Duct Size
Outside
Diameter
Wall
Thickness
Inside
Diameter
Minimum
Unsupported
Bend Radius
Safe
Working
Pull Strength
Weight Per
1000 Ft.
1/2" .840"+.012" .062"+.020" .696" 10" 320 lbs. 72 lbs.
3/4" 1.050"+.012" .078"+.020" .874" 12" 505 lbs. 110 lbs.
1" 1.315"+.012" .097"+.020" 1.101" 14" 790 lbs. 168 lbs.
1-1/4" 1.660"+.012" .123"+.020" 1.394" 18" 1260 lbs. 264 lbs.
1-1/2" 1.900"+.012" .141"+.020" 1.598" 20" 1455 lbs. 343 lbs.
2" 2.375"+.012" .176"+.021 2.002" 26" 2580 lbs. 531 lbs.
3" 3.500"+.012" .259"+.031" 2.951" 48" 5590 lbs. 1151 lbs.
4" 4.500"+.012 .333"+.040" 3.794" 60" 9250 lbs. 1904 lbs.
Polyethylene SDR 11: Meets Material and
dimensional requirements of ASTM D3035
Nominal
Duct Size
Outside
Diameter
Wall
Thickness
Inside
Diameter
Minimum
Unsupported
Bend Radius
Safe
Working
Pull Strength
Weight Per
1000 Ft.
1/2" .840"+.012" .076"+.020" .668" 10" 390 lbs. 84 lbs.
3/4" 1.050"+.012" .095"+.021" .839" 12" 605 lbs. 130 lbs.
1" 1.315"+.012" .119"+.026" 1.051" 14" 950 lbs. 203 lbs.
1-1/4" 1.660"+.012" .151"+.026" 1.332" 18" 1520 lbs. 319 lbs.
1-1/2" 1.900"+.012" .173"+.026" 1.528" 20" 1760 lbs. 415 lbs.
2" 2.375"+.012" .216"+.026 1.917" 26" 3105 lbs. 639 lbs.
3" 3.500"+.012" .318"+.038" 2.826" 48" 6740 lbs. 1386 lbs.
4" 4.500"+.012 .409"+.049" 3.632" 60" 11145 lbs. 2295 lbs.
Polyethylene Schedule 40: Meets NEMA TC-2
Nominal
Duct Size
Outside
Diameter
Wall
Thickness
Inside
Diameter
Minimum
Unsupported
Bend Radius
Safe
Working
Pull Strength
Weight Per
1000 Ft.
1/2" .840"+.012" .119"+.010" .602" 10" 530 lbs. 112 lbs.
3/4" 1.050"+.012" .123"+.010" .804" 12" 705 lbs. 148 lbs.
1" 1.315"+.012" .143"+.010" 1.029" 14" 1050 lbs. 218 lbs.
1-1/4" 1.660"+.012" .150"+.010" 1.360" 18" 1420 lbs. 295 lbs.
1-1/2" 1.900"+.012" .155"+.010" 1.590" 20" 1700 lbs. 352 lbs.
2" 2.375"+.012" .164"+.010 2.047" 26" 2300 lbs. 472 lbs.
2-1/2" 2.875"+.012" .215"+.012" 2.445 36" 3615 744 lbs.
3" 3.500"+.012" .229"+.013" 3.042" 48" 4725 lbs. 974 lbs.
4" 4.500"+.012 .251"+.014" 3.998" 60" 6730 lbs. 1387 lbs.

 

Corrugated HDPE (High Density Polyethylene) Reel Dimensions
ETL verified

SIZE
Color
Part Number
Nominal ID (Inside)
Nominal OD (Outside)
Pull Tape
Reel Size
Reel Length (Feet)
1 inch
Orange
PEC-100T-1000
1.049"
1.365"
900 lb
48-30-24
1000 Feet
1 inch
Orange
PEC-100T-1800
1.049"
1.365"
900 lb
48-30-24
1800 Feet
1 inch
Orange
PEC-100T-2500
1.049"
1.365"
900 lb
66-41-24
2500 Feet
1 inch
Orange
PEC-100T-5000
1.049"
1.365"
900 lb
72-41-24
5000 Feet
1 inch
Orange
PEC-100T-6500
1.049"
1.365"
900 lb
72-45-24
6500 Feet
1 inch
Orange
PEC-100T-8000
1.049"
1.365"
900 lb
82-41-24
8000 Feet
1 1/4"
Orange
PEC-125T-1000
1.250"
1.550"
900 lb
48-30-24
1000 Feet
1 1/4"
Orange
PEC-125T-2500
1.250"
1.550"
900 lb
66-41-24
2500 Feet
1 1/4"
Orange
PEC-125T-4000
1.250"
1.550"
900 lb
72-41-24
4000 Feet
1 1/4"
Orange
PEC-125T-5000
1.250"
1.550"
900 lb
72-41-24
5000 Feet
1 1/4"
Orange
PEC-125T-6000
1.250"
1.550"
900 lb
82-41-24
6000 Feet
1 1/4"
Orange
PEC-125T-6500
1.250"
1.550"
900 lb
82-41-24
6500 Feet

ENDOT AVAILABLE SMOOTHWALL INNERDUCTS

Part

----------------- Nominal ------------------------------

No.*

SDR

SIZE

O.D.

I.D.

Minimal Wall

086/11

11

3/4"

(19mm)

1.05"

(26.7mm)

0.860"

(21.8mm)

0.095"

(2.4mm)

086/13.5

13.5

3/4"

(19mm)

1.05"

(26.7mm)

0.894"

(22.7mm)

0.078"

(2.0mm)

086/15.5

15.5

3/4"

(19mm)

1.05"

(26.7mm)

0.914"

(23.2mm)

0.068"

(1.7mm)

131/11

11

1"

(25mm)

1.315"

(33.4mm)

1.075"

(27.3mm)

0.120"

(3.1mm)

131/13.5

13.5

1"

(25mm)

1.315"

(33.4mm)

1.121"

(28.5mm)

0.097"

(2.5mm)

131/15.5

15.5

1"

(25mm)

1.315"

(33.4mm)

1.147"

(29.1mm)

0.084"

(2.1mm)

166/11

11

1 1/4"

(32mm)

1.660"

(42.2mm)

1.358"

(34.5mm)

0.151"

(3.8mm)

166/13.5

13.5

1 1/4"

(32mm)

1.660"

(42.2mm)

1.414"

(35.9mm)

0.123"

(3.1mm)

166/15.5

15.5

1 1/4"

(32mm)

1.660"

(42.2mm)

1.446"

(36.7mm)

0.107"

(2.7mm)

190/11

11

1 1/2"

(38mm)

1.900"

(48.3mm)

1.554"

(39.5mm)

0.173"

(4.4mm)

190/13.5

13.5

1 1/2"

(38mm)

1.900"

(48.3mm)

1.618"

(41.1mm)

0.141"

(3.6mm)

190/15.5

15.5

1 1/2"

(38mm)

1.900"

(48.3mm)

1.654"

(42.0mm)

0.123"

(3.1mm)

237/11

11

2"

(51mm)

2.375"

(60.3mm)

1.943"

(49.4mm)

0.216"

(5.5mm)

237/13.5

13.5

2"

(51mm)

2.375"

(60.3mm)

2.023"

(51.4mm)

0.176"

(4.5mm)

237/15.5

15.5

2"

(51mm)

2.375"

(60.3mm)

2.069"

(52.6mm)

0.153"

(3.9mm)

 

American Tech Supply will DROP-SHIP all your innerduct needs from one 250 coil to a several truckloads of 6" HDPE. Call us today for a competitive price and let us take care of all the logistics of delivering our product to your door.

We Can Ship the Same Day! Many Colors Available!

THE BELOW PRICES ARE TYPICAL SUGGESTED PRICES- DUE TO THE PRICE OF OIL- THE PRICES CAN FLUCTUATE DAILY-PLEASE CALL (866) 342-3721 FOR UP TO DATE PRICING

Part No
Description
Ft
Price
P-100T-5000 1" Plenum Innerduct w/tape [REEL]
5000
Call
P-100T-1000 1" Plenum Innerduct w/tape [COIL]
1000
Call
P-100T-500 1" Plenum Innerduct w/tape [COIL]
500
Call
P-100T-250 1" Plenum Innerduct w/tape [COIL]
250
Call
P-125T-5000 1 ¼” Plenum Innerductw/tape [REEL]
5000
Call
P-125T-1000 1 ¼” Plenum Innerductw/tape [COIL]
1000
Call
P-125T-500 1 ¼” Plenum Innerductw/tape [COIL]
500
Call
P-125T-250 1 ¼” Plenum Innerductw/tape [COIL]
250
Call

Pricing for 1" & 1.25" HDPE Innerduct *HDPE orders under 5000 ft subject to a $60.00 reel charge, Coil prices listed

Part No
Description
Ft
Price
PEC-100T-5000 1" HDPE Innerduct w/tape [REEL]
5000
Call
PEC-100T-1000 1" HDPE Innerduct w/tape [COIL]
1000
Call
PEC-100T-500 1" HDPE Innerduct w/tape [COIL]
500
Call
PEC-100T-250 1" HDPE Innerduct w/tape [COIL]
250
Call
PEC-125T-5000 1 ¼” HDPE Innerductw/tape [REEL]
5000
Call
PEC-125T-1000 1 ¼” HDPE Innerductw/tape [COIL]
1000
Call
PEC-125T-500 1 ¼” HDPE Innerductw/tape [COIL]
500
Call
PEC-125T-250 1 ¼” HDPE Innerductw/tape [COIL]
250
Call

Pricing for 1-1/2" Plenum & HDPE- Smoothwall Innerduct - For Larger Diameter Sizes- Please Call (866) 342-3721 First Due To The Fluctuating Oil and Resin Wholesale Prices

Part No
Description
Ft
Price
PEC-150T-5000 1 ½ " HDPE Innerduct w/tape [REEL]
5000
Call
PEC-150T-1000 1 ½ " HDPE Innerduct w/tape [COIL]
1000
Call
PEC-150T-500 1 ½ " HDPE Innerduct w/tape [COIL]
500
Call
PEC-150T-250 1 ½ " HDPE Innerduct w/tape [COIL]
250
Call
P-150T-5000 1 ½” PLENUM Innerductw/tape [REEL]
5000
CALL
P-1505T-1000 1 ½” PLENUM Innerductw/tape [COIL]
1000
CALL
P-150T-500 1 ½” PLENUM Innerductw/tape [COIL]
500
CALL
P-150T-250 1 ½” PLENUM Innerductw/tape [COIL]
250
CALL

Volume discounts always apply. Please call our sales offices to obtain custom quotes

Prices reflect COD and do not include shipping or processing fees.

We Carry A Complete Array of Innerduct Couplers

American Tech Supply also carries HDPE -high density polyethylene innerduct in sizes ranging from 1/2" to 6" and is avaialable ina multitude of colors. Smooth wall is the standard High Density Polyethylene (HDPE) Duct. The interior of smooth wall has a glass-like finish which delivers the lowest coefficient of friction of all available non-lubricated innerducts. Our smooth wall innerduct is a durable high quality product for direct burial applications.

ATS also carries Ribbed wall innerduct which innerduct is designed to allow extremely long cable pulls to glide through the interior raised ribs. All ribbed wall innerduct is internally ribbed and available in any SDR and SIDR rating.

Our Tracer wire innerduct provides a method of locating underground fiber optic cable. The tracer wire is a single copper wire co-extruded into the innerduct providing a corrosion resistant conductor. An alternative method of locating buried fiber optic cable is to use detectable tape, available pre-installed in any of our duct products.

American Tech Supply Will NOT BE UNDERSOLD- Call Us Today For All Your Innerduct & Duct Needs -We Will Beat Any U.S. Based Price!

UL Listed-We Now Offer Pre- Installed Fiber Cable In Our Innerduct- Ask Us For Details- (866) 342-3721

ATS can ship many HDPE innerduct and HDPE duct products the same day, however on special orders and colors please be advised that we require 7-10 days to process your innerduct order. Thank you.

HDPE Innerduct Available To 1/2" TO 6" Innerduct Diameter Sizes

Colors and Identification

  • Standard colors available in: white, black, blue, green, red, orange, lilac, grey, yellow, brown, buff, terra cotta.
  • Striping: Striping combinations are available in all colors in combinations of single, double, triple and quad stripes.

Other Identification

  • Innerduct size, SDR and sequential footage markings every 2’ are laser imprinted on every order.
  • Custom imprints such as company name, project name or any other special identification markings also available

Options

  • Lubrication
  • Up to four lengths/colors of innerduct per reel available laid in parallel or segmented on a reel.
  • Pre-installed pull tape, tracer tape
Smooth Wall Innerduct 1/2" to 6" Diameter

Smooth wall is the standard High Density Polyethylene (HDPE) Duct. The interior of smooth wall has a glass-like finish which delivers the lowest coefficient of friction of all available non-lubricated innerducts. Blue Diamond smooth wall innerduct is a durable high quality product for direct burial applications.

Ribbed Wall Innerduct Smooth Wall Innerduct 1/2" to 6" Diameter

Our ribbed wall innerduct is designed to allow extremely long cable pulls to glide through the interior raised ribs. All ribbed wall innerduct is internally ribbed and available in any SDR and SIDR rating.

Tracer Wire Innerduct Smooth Wall Innerduct 1/2" to 6" Diameter

Tracer wire innerduct provide a method of locating underground fiber optic cable. The tracer wire is a single copper wire co-extruded into the innerduct providing a corrosion resistant conductor. An alternative method of locating buried fiber optic cable is to use detectable tape, available pre-installed in any of our duct products.

Figure 8 Duct Smooth Wall Innerduct 1/2" to 6" Diameter

Our figure 8 innerduct features a high tensile galvanized support strand for aerial placement of duct. The support strand is an integral component of the co-extruded duct.

Plenum Available at 1- 1/2" and HDPE Innerduct Available in 1/2" to 6" Sizes

Pricing for 1" & 1.25" Plenum Innerduct- Is In "RED"

[Prices do not include shipping, FOB point PA]


Plenum innerduct is offered in 1"and 11/4", with pre-installed pull tape for easy cable installation. The standard color is orange and is offered in a variety of other colors. Sequential marked footage is standard. Custom options, such as multiple colors per reel and Slit Duct, are also available.American Tech Supply provides turnaraound for corrugated innerduct by providing rapid shipping service that we have in stock including a complete Line of ETL verified Innerduct, plenum innerduct, fiber optic duct, conduit and raceway systems including Fiber Duct, Outside Plant Conduit, Plenum Innerduct, Riser Rated Innerduct, Toneable Duct, Corrugated Innerduct and more. Corrugated HDPE Premier Corrugated HDPE is manufactured from High Density Polyethylene (HDPE) and is intended to be placed inside of existing innerduct. Plenum innerduct is ideal for pulls under 1000 ft. and is designed to reduce surface contact when pulling cable. Our plenum innerduct is a flexible, non-metallic, corrugated raceway used for effective cable and fiber optic management within interior raceways. Our Plenum duct is offered in 1" and 1 1/4", with pre-installed pull tape for easy cable installation. The standard color is orange and is offered in a variety of other colors. Sequential marked footage is tandard. Custom options, such as multiple colors per reel and Slit Duct, are also available.This lightweight product offers maximum flexibility, and allows for installation in small or restricted areas. Corrugated duct is available in 1" and 11/4". The standard color is orange and is offered in a variety of other colors. Sequential marked footage is standard. Custom options, such as multiple colors per reel and Slit Duct, are also available.

Corrugated HDPE Innerduct

Corrugated HDPE (High Density Polyethylene) Reel Dimensions
ETL verified

SIZE
Color
Part Number
Nominal ID (Inside)
Nominal OD (Outside)
Pull Tape
Reel Size
Reel Length (Feet)
1 inch
Orange
PEC-100T-1000
1.049"
1.365"
900 lb
48-30-24
1000 Feet
1 inch
Orange
PEC-100T-1800
1.049"
1.365"
900 lb
48-30-24
1800 Feet
1 inch
Orange
PEC-100T-2500
1.049"
1.365"
900 lb
66-41-24
2500 Feet
1 inch
Orange
PEC-100T-5000
1.049"
1.365"
900 lb
72-41-24
5000 Feet
1 inch
Orange
PEC-100T-6500
1.049"
1.365"
900 lb
72-45-24
6500 Feet
1 inch
Orange
PEC-100T-8000
1.049"
1.365"
900 lb
82-41-24
8000 Feet
1 1/4"
Orange
PEC-125T-1000
1.250"
1.550"
900 lb
48-30-24
1000 Feet
1 1/4"
Orange
PEC-125T-2500
1.250"
1.550"
900 lb
66-41-24
2500 Feet
1 1/4"
Orange
PEC-125T-4000
1.250"
1.550"
900 lb
72-41-24
4000 Feet
1 1/4"
Orange
PEC-125T-5000
1.250"
1.550"
900 lb
72-41-24
5000 Feet
1 1/4"
Orange
PEC-125T-6000
1.250"
1.550"
900 lb
82-41-24
6000 Feet
1 1/4"
Orange
PEC-125T-6500
1.250"
1.550"
900 lb
82-41-24
6500 Feet

Corrugate HDPE (High Density Polyethylene) Reel Dimensions
ETL verified

Size
Color
Part Number
Nominal ID
Nominal OD
Pull Tape
Coil Length
1 Inch
Orange
PEC-100T-250
1.049"
1.365"
900 lb
250 Feet
1 Inch
Orange
PEC-100T-500
1.049"
1.365"
900 lb
500 Feet
1 1/4"
Orange
PEC-125T-250
1.250"
1.550"
900 lb
250 Feet
1 1/4"
Orange
PEC-125T-500
1.250"
1.550"
900 lb
500 Feet

How to build a part number For Large Diameter Duct
 

Prefix

Size

Wall Thickness

Color

Stripes

Ribbed interior

Tape

BDI

06 = ½”

2 = SDR 9

OR = Orange

ORS =Orange Stripe

RI

T10 = 1000# tape

 

09 = ¾’

3 = SDR 11

BL = Blue

BLS = Blue Stripe

 

T12.5 = 1250# tape

 

11 = 1”

4 = SDR 13.5

BK = Black

BKS = Black Stripe

 

T18 = 1800 # tape

 

13 = 1 ¼”

5 = SCH 40

GR = Green

GRS = Green Stripe

 

T25 = 2500# tape

 

16 = 1 ½”

6 = SDR 15.5

RD = Red

RDS = Red Stripe

 

MT = 1250# detectable tape

 

21 = 2”

7 = SCH 80

YL = Yellow

YLS = Yellow Stripe

   
 

31 = 3”

8 = SDR 17

WH = White

WHS = White Stripe

   
 

41 = 4”

 

GY = Gray

GYS = Gray Stripe

   
 

51 = 5”

 

BR = Brown

BRS = Brown Stripe

   
 

61 = 6”

 

BF = Buff

BF = Buff Stripe

   
     

TC = Terra Cotta

TCS = Terra Cotta Stripe

   
     

LI = Lilac

LIS = Lilac Stripe

Duct Plugs

Blue Diamond duct plugs seal your conduit or innerduct from water, animals, debris or any other underground intrusion. Available in various sizes and models, duct plugs are designed for easy retrofitting and removal. Duct plugs help protect and seal occupied and unoccupied conduit and innerduct in an extensive range of applications.

American Tech Supply is a supplier of Innerduct, OSP, HDPE, Riser Rated Innerduct, Plenum Innerduct, Corrugated duct, Outside Plant Conduit, Fiber Optic Duct, ETL Verified Conduit

Corrugated HDPE Premier Corrugated HDPE is manufactured from High Density Polyethylene (HDPE) and is intended to be placed inside of existing innerduct. It¹s ideal for pulls under 1000 ft. and is designed to reduce surface contact when pulling cable. This lightweight product offers maximum flexibility, and allows for installation in small or restricted areas. Corrugated duct is available in 1" and 11/4". The standard color is orange and is offered in a variety of other colors. Sequential marked footage is standard. Custom options, such as multiple colors per reel and Slit Duct, are also available.

** Core rebates are available for reels broken down and returned to the manufacturer. Call our offices for details

Prices reflect COD and do not include shipping or processing fees. Please add a 3% minimum charge for all credit card orders.

Slit Duct-Endot Slit Duct-Slit Innerduct-Innerduct-Riser Rated Innerduct

ROCKAWAY, NJ - We also specialize in last minute rapid turnaround and delivery. our new corrugated slit duct is made of low-density polyethylene plastic for greater flexibility when joining and racking innerducts. Easy to use, it slides readily over fiber optic cable and inside innerduct. The slit duct is offered in 250-foot lengths that can be cut for application in the field. It is available in high-visibility orange in sizes from 1/2" ID through 2" ID.innerduct, corrugated inneduct, and plenum innerduct that is also ETL verified Innerduct, plenum innerduct, fiber optic duct, conduit and raceway systems including Fiber Duct, Outside Plant Conduit, Plenum Innerduct, Riser Rated Innerduct, Toneable Duct, Corrugated Innerduct and more. Corrugated HDPE Premier Corrugated HDPE is manufactured from High Density Polyethylene (HDPE) and is intended to be placed inside of existing innerduct.

Part Number Description Packaging List Price- Please Call For Discounts
ICS 050 41 01 02-250 1/2 " Corrugated Split Duct 250 Foot Coil CALL
ICS 075 41 01 02-250 3/4" Corrugated Split Duct 250 Foot Coil CALL
ICS 100 41 01 02-250 1" Corrugated Split Duct 250 Foot Coil CALL
ICS 125 41 01 02-250 1 1/4" Corrugated Split Duct 250 Foot Coil CALL
ICS 150 41 01 02-250 1" Corrugated Split Duct 250 Foot Coil CALL
ICS 150 41 01 02-250 1" Corrugated Split Duct 250 Foot Coil CALL

OurPlenum Innerduct Meets UL 910 & UL 2024- 85% Fill Ratio Cable Guide!

American Tech Supply also carries a complete line of plenum innerduct and plenum raceway products including Plenum Fiber Duct, Outside Plant Conduit, Plenum Innerduct, Riser Rated Innerduct, Corrugated Innerduct and more. Plenum Duct is a flexible, non-metallic, corrugated raceway used for effective cable and fiber optic management within interior raceways. Premier-Plenum meets UL-(910) standards for the National Electrical Code, Article 770, and satisfies UL-2024 standards for low smoke and flame propagation. Pur Plenum duct is offered in 1" and 1 1/4", with pre-installed pull tape for easy cable installation. The standard color is orange and is offered in a variety of other colors. Sequential marked footage is standard. Custom options, such as multiple colors per reel and Slit Duct, are also available..

We can deliver a 500 Foot Reel of Innderduct to Most Locations In the United States For about $300.00 Per 500 Foot Coil Call Us at (866) 342-3721 or 650-DATA

"Contractor Installed the wrong duct & fiber needs to be installed this weekend?

"Your local distributor has no duct in stock or has the wrong duct and needs it right away?"

"You have everything, the fiber cable, testers, jacks, but the duct- and you need it right away?"- We specialize in Rapid- 24- 48 Hour Turnaround

View PDF White Paper On Cable Guide here

Cable Guide fabric innerduct that is equivalent to Maxcell allows you to place the maximum number of cables in any type of conduit network structure. By taking the shape of the cables placed within, Cable Guide allows you to utilize up to 80% of available duct space-Click For Complete Information About Cable Guide Fabric Innerduct.

HDPE Innerduct Specifications Call For Latest Pricing (866) FIBER-21

HDPE Innerduct Specifications

Looking for an alternative conduit source?

We offer superior quality conduit at competitive prices and immediate service.

Home | Cables | Switches | Contact Us | Our Team | Locations


 

 

 

 

 

 

 

 

 

Underground Vaults