Tester LT-100 for Twisted Pair, Coaxial Cable, Telephone
|This device is used for testing of mains and patch-cords
It is used to test telephone, twisted-pair and coaxial cables
Consists of an active and a passive (plug) parts
The active parts is Krone battery powered
This device is used to test the line for the proper cabling, breakdown, short circuit and pair polarity
Tester for twisted pair
|The handheld device with a sound signal for testing of RJ-45/UTP and RJ-45/STP cables
This device has LED lights for testing functions and a test mode switch
Battery DC 12V (GP-23AE)
Tester for Twisted Pair, Coaxial Cable, Telephone
|The device for testing of twisted pair, telephone, USB and coaxial cable
It is used to test lines with RJ-45, RJ-11, USB, BNC modular plugs
It consists of an active and a passive parts
The device has an integrated BNC terminator 25/50 Ohm, direct/cross connection indicator, battery charge indicator
The length of the cable tested is 295.28' (90 m) max
Cable Tester for twisted pair, LCD, measures cable length
|Cable types to be tested:
It is used for testing unshielded pair and shielded pair (UTP, FTP) of RJ45 port; with special adapters, it is able to test RJ11 port, telephone line (TEL) and coaxial cable.
One person is enough to complete link continuity test.
The tester is able to detect wiring troubles such as open circuit, short-circuit and dislocation.
The device is easy to use and the test result is clearly displayed on LCD as wiring diagram.
Voice report of test result makes test work convenient and interesting (only Model "A" unit).
It is portable with long service battery (reserve for 50 hours).
It can locate cable with 8 far-end passive test ports (Identification Numbers ID1 - ID8 are used for quick check of cable far-ends respectively).
Single chip microprocessor software watchdog design is reliable in operation.
Low battery voltage alarm display.
|Overall Dimension: 123.7x66.5x24.5 mm
Battery: 4 x AAA 1.5V dry battery with power consumption 8 mA
Display: Special cable tester LCD (effective visual range 35x17 mm)
Cable Types to be tested: UTP/FTP twisted pair, coaxial cable (BNC) and telephone line (TEL)
Working Temperature: -10?C to +40?C
Tester Ports: Main RJ45 master port (M), Loop-back RJ45 port (L) and far-end recognizer RJ45 port (R)
Maximum Length of Cable:
twisted UTP/FTP cable < 300 m,
Location of Wiring Sequence and Cable Trouble: detection of trouble such as open circuit, short-circuit and dislocation.
BNC coaxial cable < 500 m,
TEL telephone line < 300 m.
Location of Cable Link Route: Maximum 8 far-end identification recognizers are used in test and location of cable links (ID1 - ID8)
Cable Tester for twisted pair, coaxial cable, LCD
|LA serial digital LCD network cable tester is the newest product which has a lot of advantages, for example, lower power waste, higher efficiency, track and seek cables and so on. Moreover, HL-LCD-LA can work not only single machine but also double machines to test synchronous shown to raise the efficiency. Fashion designed with digital audio frequency signal seek function.
|Overall dimension: 103x79x27.5 mm
LCD Screen Size: 22x36.5 mm
Battery (AAA) Weight: 80 g
Battery life: 240 hours for standing by or 50 hours for continuing
8P8C: UTP, F(S)TP, BNC, COAXIAL
Connecting Type Tested
6P6C: TELEPHONE CABLE
Working Temperature/Humidity: 0?C~50?C/20%~70%
- Display the cable number
Preserved Temperature/Humidity: -10?C~60?C/10%~90%
Single machine tester manual:
|Switch on the power, put the end of cable into M&L ports and LCD screen will show: TEST (ING) and automatically testing will start. When the number stops jumping on LCD screen the result of cable connected situation is shown.
Cable Tester for twisted pair, coaxial cable, LCD, measures cable length
|Cable tested: UTP. FTP. Coax cables, two, three or four wire pairs in twisted pair cables and test all category UTP cables and hardware.
Verify end-to-end connectivity per EIA/TIA 568 wiring stand?rd.
Detects wiring problems: Opens, Shorts, miswires (Crossed, Reversed, Split pair).
Locates wiring/connection errors (distance to the open or short).
Can identify up to 8 different cables at one end by provided remote identifiers.
Measures cable length.
Easy to use only: One button to select the test and two character lines LCD.
Low battery indicator, Auto power off, long battery life (60 hours continuous)
|Display: Two character lines LCD (16 characters each)
Connector: RJ45 and BNC
Category: CAT3, CAT4, CAT5
Fault status: Opens, Shorts, Reversed, Crossed, Split Pair
TEST provides a pass/fail report on the cable under test.?
In case a failure has been detected, the display offers additional diagnostic information.?
LENGTH provides the length of each pair (in case a twisted pair cable is being tested).?
WIRE MAP provides the detail wiring for the cable.
Range 2 to 999ft or 1.0 to 350 m.
Resolution Cables < 100 m : 0.5 m (Cables < 100 ft : 0.5 ft) , Cables > 100m : 1m (Cables > 100 ft : 1 ft)
Accuracy 5% + 1 m (5% + 3ft)
Power 6 pcs 1.5 V size AAA alkaline battery.
Input protection: The inputs withstand telephone ringing and loop voltages.
Size/Weight: 152 mm x 72 mm x 35 mm/Approx. 215 g
Operating: 0?C to +40?C.?
Accessories: Instruction manual, Carring case, One UTP Category 5 patch cable, One RJ45F- RJ45F female coupler, Cable identifier #1 for the verification of the wire map. (Optional A for #2, #3 & #4) (Optional B for #5, #6, #7 & #9)
Storage: -20?C to +60?C.
||Tester LT-100 for twisted pair, coaxial cable, telephone (a jacket made of leatherette)
||Tester for twisted pair
||Tester for twisted pair, coaxial cable, telephone
||Cable Tester for twisted pair, coaxial cable, LCD, measures cable length