Tray Reducer-Cable Tray-Cabletray-Cable Trays- Cable Tray Systems- Raceway Systems

Cable-Mgr-Save 50% On Cable Tray Installation Costs

ATS is a national supplier of raceway systems and Cable Tray from Cable Manager- ATS is also a Cable Tray Supplier, including Cable Tray, Straight Cable Tray, Cabletray, Cable Trays, Cable Tray Systems, Basket Tray, and Raceway Systems. Cable-Mgr.'s innovative cable tray, and extensive cable tray systems design are based on pre-fabricated junctions/intersections and the ability to provide powder coated finishes while maintaining grounding. The design eliminates the need to cut or bend sections or install a separate ground wire. Cable-Mgr. is U.L. classified as to its suitability as an equipment grounding conductor only.No connecting hardware required. All support hardware available. Powder coating is standard finish.Custom sizes available. Furthermore, Cable-Mgr.'s wire grid cable tray systems require only one tool and very few accessory items for installation. Pre-fabricated junctions/intersections reduce man-hours by eliminating cutting and fabrication in the field. With center hung trapeze, wall or floor mount accessories, Cable-Mgr. is prepared to handle the toughest installations. Cable Tray Hardware & Accesorries

 

CM19 Cable Tray Reducer

Cable tray Pre-fabricated reducers (Ø.120") are available in standard configurations with a grid pattern of 2 inches x 2 inches and a depth/height of 2 or 4 inches (12-8, 8-6 and 6-4 are standard). All reducers are 2 feet in length. See finish chart for standard colors; safety yellow is the standard. Custom colors are available. Sections include interconnecting hardware.

 

CM29 Cable Tray Reducer

Cable tray-Pre-fabricated reducers (Ø.187") are available in standard configurations with a grid pattern of
2 inches x 4 inches and a depth/height of 2, 4 or 6 inches (24-18, 18-12, 12-8 and 8-6 are standard).
All reducers are 2 feet in length. See finish chart for standard colors; safety yellow is the standard. Custom colors are available. Sections include interconnecting hardware.

 

CM39 Cable Tray Reducer

Cable tray Pre-fabricated reducers (Ø.250") are available in standard configurations with a grid pattern of
2 inches x 4 inches and a depth/height of 2, 4 or 6 inches (24-18, 18-12 and 12-8 are standard).
All reducers are 2 feet in length. See finish chart for standard colors; safety yellow is the standard. Custom colors are available. Sections include interconnecting hardware.

Cable Tray Hardware & Accesorries

We’re here to help you solve your business challenges and increase your ability to meet your own customers’ growing expectations from their telecommunications service providers.