Other Product Lines
     About Us

?2010 American Tech Supply

Wholesale Ladder Racks-Ladder Racks- Ladder Rack Systems- 3 Foot Ladder Rack- 5 Foot Ladder Racks- 10 Foot Ladder Racks-Raceway Systems

American Tech Supply now carries a complete line of ladder racks including 3 foot ladder racks, 5 foot ladder racks and 10 foot ladder racks and ladder rack systems, raceway systems, manufactured by Newton, Hendry, Panduit, Hoffman, Kewaunee, B-Line, ICC, and others. Our ladder rack system offers a complete set of cable installation, routing and management components that are engineered for configuration flexibility and installation versatility. Please note our ladder rack products below including our ladder rack inside corner, ladder rack outside corner, and ladder rack flat turn models below. American Tech Supply now has thousands of feet of 12" ladder rack, 24" ladder rack, and 30" ladder rack- all ladder rack is ready to ship at costs less than 80% from other suppliers. We provide Two Side Rail systems in a variety of materials and finishes, bottom types, and strength requirements with unmatched accessory packages.  In addition, we have the fastest systems to install with maximum cable freedom in our Cent-R-Rail® single rail cable tray systems.  For wire mesh, short span, cabling support needs, B-Line offers a full complement of styles, sizes and accessories in our Wire Basket Cable Support line.

Cooper Bline Data Sheets-Diagrams

We now have in stock hundreds of thousands of feet of 12" ladder rack, 24" ladder rack and more at 80% off list price! First Come -First Serve- Shipping From our wharehouse in Northern CA!

 

 

3 Foot Ladder Racks- We stock 90degree bend for the 5 and 10 foot ladder racks below

5 Foot Ladder Racks-5 feet length runway sections are designed to support horizontal cable running over-head. Constructed of heavy duty 16-gauge steel with a durable powder coated finish, they can be easily attached to all ICC racks.

10 Foot Ladder Racks

Cooper B-Line Cable Tray Systems - Two Side Rail Systems

B-Line provides Two Side Rail systems in a variety of materials and finishes, bottom types, and strength requirements with unmatched accessory packages.

Select from the choices below to learn more about B-Line Cable Tray options.

Cable Tray Catalog Information

Cable Tray Products

Cable Tray Catalogs

Division 16 - Electrical CSI Specifications

Technical Sheets and Flyers

Cable Tray Design Software (TrayCAD)

Looking For Other Technical Information?

Hoffman Ladder Racks Data Sheets

 

Cooper Bline Data Sheets-Diagrams

 

 

 

 

 

Ladder Rack System

American Tech Supply now carries a complete line of ladder racks, ladder rack systems, raceway systems, panels and cross-connect products manufactured by Newton, Hendry, Hoffman,Kewaunee, B-Line, ICC, and others. Our ladder rack system offers a complete set of cable installation, routing and management components that are engineered for configuration flexibility and installation versatility. Please note our ladder rack products below including our ladder rack inside corner, ladder rack outside corner, and ladder rack flat turn models below.


NEW Ladder Rack Runway

NEW Ladder Rack Accessories

NEW Ladder Rack Runway Mounting Kits

NEW Straight Ladder Rack Runway
NEW Ladder Rack Runway 900 Flat Turn
NEW Ladder Rack Runway 900 Inside Corner Radius Bend
NEW Ladder Rack Runway 900 Outside Corner Radius Bend

Key features:

  • Robust 16-gauge steel construction with a durable powder coated finish.
  • Configuration flexibility adaptable to a wide range of access, run and cable delivery constraints
  • Easy to install with attaching hardware included where necessary.

 

Runway section is designed to support horizontal cable running over-head. Constructed of heavy duty 16-gauge steel with a durable powder coated finish, it can be easily attached to all ICC racks.

ICCMSLST05-Five Foot Ladder Rack-Can Be Sent via UPS

Part Number: ICCMSLST10

10 ft*., Runway, 12 in. Wide

*We Have Shorter Lengths!!

Runway radius bend section is used to change the horizontal cable running over-head in a 90° vertical direction to route cables downward to a vertical ladder.

Part Number: ICCMSLOR90

Runway Radius Bend, 12 in. Wide

Runway radius bend section is used to change the horizontal cable running over-head in a 90° vertical direction to support ceiling cable entry.
Part Number:ICCMSLIR90

Runway Radius Bend, 12 in. Wide

Turn section is designed to change the horizontal cable running over-head in a 90° flat turn.

Part Number:ICCMSLFT90

Runway 90° Turn, 12 in. Wide

    For Installation Instructions of Ladder Rack 

ITEM NUMBERDESCRIPTION
 ICCMSLST10 Runway Section, 12-inches Wide x 10-foot Length
  ICCMSLFT90 90? Turn Section, 12-inches Wide, flat turn.
  ICCMSLIR90 Inside Radius Bend Section, 12-inches Wide
  ICCMSLOR90 Outside Radius Bend Section, 12-inches Wide
  ICCMSLAWSK Kit, Wall Support, 12-inches Wide
  ICCMSLTWSK Kit, Wall Support, Triangle, 12-inches Wide
  ICCMSLVWBK Bracket, Vertical Wall Mount
  ICCMSLCMRK Kit, Ceiling Mount and Rod (2 Threaded rods included)
  ICCMSLMFFK Kit, Foot Floor Mount
  ICCMSLRRBK Bracket, Ladder to Relay Rack, 12-inches Wide
  ICCMSLEBSK Kit, End-to-end Butt Splice
  ICCMSLTJSK Kit, Runway Section, T-Junction Splice
  ICCMSLCRPK Kit, Cable Retaining Posts (includes 2 posts)
  ICCMSLCRDK Runway Center Radius Drop, 12-inches Wide

B-Line Cable Management Racks

Manage Your Cable While Managing Your Budget.

Now, installers have access to the most feature rich cable management system in the industry...introducing Cooper B-Line's RCM+.  Offering simplified cable management, a more flexible solution for all installations and a reduced total installed cost.  RCM+ has all the configurations you need for your rack supported cable management requirements.

Flexibility -

Need gates on the left, but fingers on the right?  No problem.  How about adding doors on the back?  Again, no problem!  The RCM+ open system design offers countless options and solutions to deal with issues of cable access and cable routing...like those that are created by increasing demands for faster data transmission and higher cable density.  The RCM+ incorporates an innovative modular unit concept with total interchangeability of parts over all units.  All rearrangement and modification of the cable management system is done easily in the field.  Flexibility...based on your application needs now and in the future.

Affordability -

Our RCM+ cable managers offer all the features of higher priced systems, PLUS features that aren't offered on products priced at two, three and four times as much.  Also, because of the way the RCM+ is designed, you will find significant labor savings, dramatically improved cable routing and access options.  All part of a system that can be tailored to almost any need.

Installability -

No matter what your requirement is, RCM+ can be installed in whatever configuration you need, on whatever standard 2-post rack you have or want.  The clean, simply designed appearance blends with the widest range of architecture and environments.  If you require retrofitting a cable manager to an existing rack, or if you are looking to add additional racks and accessories, RCM+ will cure all of your cable management headaches.

Features & Benefits:

360° cable routing... from anywhere, to anywhere, through anywhere.

The open back design permits cable to enter or exit the cable manager at any RMU level, resulting in more direct routing to any point on the rack or an adjacent cable manager. This means less cable density, looser bundling and faster moves, adds and changes. The advantages of the open back design are amplified by the open side feature of double-sided managers.

Efficient, lower cost cable installation.

The 1/4" accessory mounting holes spaced every 1/2 RMU extend along the entire height of the RCM+.  They are an integral component of the open system design. Permitting quick attachment of a wide variety of cable management devices, they are used to support, segregate and route cables going in all directions, whether entering, leaving or passing through the manager.

Assists with data integrity by reducing cable density.

The RCM+ takes full advantage of the cable pass-through openings on the side of the new, deeper racks. The open sides created by spaced-apart mounting, allow cable to pass through the cable manager to an adjacent rack or into either cable manager through the open back.

Compatible with advancements in rack designs and rack supported components.

The RCM+ introduces a new system that consists of cable retention gates that uniquely nest under the two-piece double-hinged doors. When doors are opened, the gates provide containment, but can also be opened from either side or removed as convenience dictates.

The gates can be snapped on at any location and additional gates can be added to the system.

Fast and convenient access with dynamic cable containment.

The system used to mount plastic cable support fingers is common to all cable managers in every series.  Any combination and arrangement of fingers can be installed on the mounting rails. The same universality is applied to the snap on hinges of all doors and gates. This interchangeability allows any RCM+ cable manager to be modified in the field to accommodate a broad range of applications.  This also provides for adaptability to meet any future changes required.

Field modifiable features reduce future costs.

Don't Gamble With Quality- Buy American

Call (866) 342-3721 Or Click On The Chat Button At The Top Of The Page To Talk To One Of Our Representatives

Call Or Click On The Spinning Words To BUY ONLINE!

cisco systems
Telco Systems
Anritsu
Leviton
telecom supply