Wirewerks Products

 

About Us

 

 
©2013 American Tech Supply
 

10/100Base T/TX to 100Base FX Media Converters- Ethernet Active Devices- Wirewerks- Wirewerks Fiber Optic Test Equipment-ADSL Splitters-Telecommunications Test Equipment-Optical Fault Locater-OTDR- Optical Power Meter-Optical Light Sources

ATS carries Wirewerks's entire product line including their world class fiber optic test equipment, fiber optic passive and active components, DSL splitters and much more. Please visit our store for placing an order please call (866) 650-3282 for more information or quantity discounts.  Please visit our store for placing an order please call (866) 650-3282 for more information or quantity discou

Wirewerks Fiber Test Equipment- Wirewerks Fiber Enclosures- DSL Splitters-Copper Test Equipment-Fusion Splicers-Fiber Jumpers- Optical Splicing and Test Equipment

 

10/100Base T/TX to 100Base FX Media Converters

Product Overview

Part Number : WMC1-422ST02


Wirewerks Fast Ethernet media converters provide an easy and economical solution to upgrade a copper based network to fiber optic to extend the signal reach, or to bridge copper and optical fiber cabling by converting an electrical signal to an optical signal. Their plug-and-play design enables a quick and easy installation.

Wirewerks media converters can be used as standalone with their external power supply, or mounted in Wirewerks media converter chassis with centralized power supply.

FEATURES & BENEFITS

  • Half or full duplex auto-negotiation.
  • 10/100 Mbps auto-negotiation for copper port.
  • Auto MDI/MDI-X for copper port.
  • Support Link Fault Pass Through function.
  • Plug-and-play installation.
  • Extend network distance up to 60 km.
  • Accommodate a variety of connector types.
  • Power and Link status LED for monitoring and management.
  • 19 inches rack mountable in Wirewerks media converter chassis.
  • External power supply
  •  

    Application

  • Local Area Networks (LAN).
  • Enterprise Networks.
  • Campus Networks.
  • Fiber to the Building (FTTB).
  • Fiber to the Curb (FTTC).
  • Point-to-point fiber networks.
  •  

    Technical Spec

      PHYSICAL CHARACTERISTICS
      Twisted Pair interface : RJ45
      Fiber optic interface : SC or ST or LC
      Twisted pair media : CAT3, CAT5e, and higher
      Fiber optic media : Multimode 50/125 ??m, 62.5/125 ??m, single mode 9/125 ??m
      LED indicators :Power status, TP port, LNK/ACK, FDX/COL
      Encasement material : 20 gauge Cold Rolled Steel (CRS)
      Overall dimensions : 97 mm (3.82 in) x 69 mm (2.72 in) x 26 mm (1.02 in)
      Weight : 0.2 kg (0.44 lb) without power supply
      MECHANICAL CHARACTERISTICS
      Operating temperature : 0?? C (32?? F) ~ 50?? C (122?? F)
      Storage temperature : -40?? C (-40?? F) ~ 70?? C (158?? F)
      Relative Humidity : 10~90% non-condensing
      TRANSMISSION CHARACTERISTICS
      Signal distance TP port : 100 m max.
      Signal distance fiber port : Multimode ; 2 km max.
      Single mode 20 km max., 40 km max., 60 km max.
      Latency : <10 ??s (LIFO)
      Throughput at 100Base : 148,809 pps (64 byte packets)
      Speed : 100Base TX: 100/200 Mbps half/full duplex
      10Base T: 10/20 Mbps half/full duplex
      Switching method : Store-and-forward
      Maximum MAC addresses: 1,024 entries
      Memory : 128 KB
      OPTICAL CHARACTERISTICS
      Wavelength multimode : 1310 nm (nom.), 1360 nm (max.), 1270 nm (min)
      Wave length single mode : 1310 nm (nom.), 1340 nm (max.), 1270 nm (min.)
      Output power multimode : -12/-22 dBm (max./min.)
      Output power single mode : 20 km: -8/-15 dBm; 40 km: -3/-8 dBm; 60 km: 0/-3 dBm (max./min.)
      Input power multimode : -3 dBm (max.)
      Input power single mode : 20 km: -8 dBm (max.); 40 km: -3 dBm (max.); -3 dBm (max.)
      Sensitivity multimode : -30 dBm
      Sensitivity single mode : -38 dBm
      Link budget multimode: 8 dB
      Link budget single mode : 20 km: 23 dB; 40 km: 30 dB; 60 km: 35 dB
      ELECTRICAL CHARACTERISTICS
      External power supply: 5 Volts DC, 0.8 A max.
      Power consumption : 2.5 Watts max.

    Certifications & Compliances

    IEEE 802.3
    10Base T Standard.
    IEEE 802.3U
    100Base TX Fast Ethernet Standard.
    FCC PART 15,CLASS A
    Emissions and Immunity Standard.
    CE
    European Conformity Standard.
    ROHS
    Directive on Restriction of Hazardous Substances.
     

    Downloads

    View Product Datasheet in PDF

    Home | Cables | Switches | Contact Us | Our Team | Locations

     

     

     

     

    Corning Fiber Jumpers

     

    Bend Bright Fiber Assemblies

    Fiber Optic Adapters

    foa8mm01.gif (11826 bytes)

     

    Fiber Optic Connectors

     

    Fiber Optic Attenuators

     

     

    Fiber Optic Media Converters

    Fiber Optic Enclosures

    Fiber Optic Cables

    Fiber Optic Test Equipment

    Mode Conditioning Cables

    Fan Out Cables

    MPO Cassettes