Schedule 40 Conduit-Schedule 40 Duct-Schedule 40 Supplier- Schedule 40 Distributor - Outside Plant Conduit - Fiber Optic duct -Pre- Installed Fiber In Duct

American Tech Supply an innerduct and duct supplier specializes in fast turnaraound for Schedule 40 Conduit, Schedule 40 Duct,Schedule 40 Supplier, Schedule 40 Distributor and a complete Line of Innerduct and Raceway Products including standard innerduct, Plenum Innerduct, High Density Polyethlene Duct, Outside Plant Innerduct, HDPE, Most OSP Duct ,Plenum Innerduct,Corrugated Innerduct, Corrugated HDPE, Riser Rated Innerduct, Outside Plant Conduit, Fiber Optic duct and our custom Pre-Installed Fiber In Duct. ATS's HDPE innerduct is available in sizes ranging from 1/2" to 6" inches in diameter with several SDR or HDPE innerduct wall thickness. Schedule 40 conduit is guaranteed against rot, rust, electrolytic corrosion and to be free from defect in materials and workmanship. Manufacturers' responsibility under this guarantee is limited to furnishing sufficient product to replace materials acknowledged to be defective.

NEMA TC2/Sch 40 - Info- Schedule 40 conduit is available in 10 foot and 20 foot lengths, bell and spigot ends. Spigot end is chamfered and marked with a depth ring. Conduit diameters range from 2 - 8 inches and are also available in 10-foot lengths with attached coupling.  Custom colors are available upon request. Schedule 40 conduit is guaranteed against rot, rust, electrolytic corrosion and to be free from defect in materials and workmanship. Manufacturers' responsibility under this guarantee is limited to furnishing sufficient product to replace materials acknowledged to be defective.

NEMA TC2/Sch 80- Info- Schedule 80 conduit is available in 10 or 20 foot lengths, bell and spigot ends. Spigot end is chamfered and marked with a depth ring. Conduit diameters range from 2 - 6 inches. Schedule 80 conduit is guaranteed against rot, rust, electrolytic corrosion and to be free from defect in materials and workmanship. Manufacturers' responsibility under this guarantee is limited to furnishing sufficient product to replace materials acknowledged to be defective-Info

ATS Can provide TRUCKLOAD QUANTITIES of Schedule 40 or Schedule 80 conduit for 80 points or 40,000 pounds- whichever comes first.

We now STOCK in Tampa & Texas Schedule 40- 4" Duct- The Schedule 40 & Schedule Comes in 10 and 20 Foot Lengths or "sticks"- More Info-Link

ATS stocks many sizes of innerduct as well as colors of innerduct and can ship most innerduct orders including custom- including colored innerduct within 48 hours. Our corrugated HDPE innerduct/duct is manufactured from High Density Polyethylene (HDPE) and is intended to be placed inside of existing duct. Our corrugated innerduct is ideal for pulls under 1000 ft. and is designed to reduce surface contact when pulling cable. This lightweight product offers maximum flexibility, and allows for installation in small or restricted areas. Our Corrugated innerduct is available in 1" and 1 1/4". The standard color is orange and is offered in a variety of other colors. Sequential marked footage is standard. Custom options, such as multiple colors per reel and Slit Duct, are also available.

AmericanTech Supply now carries a complete line of PVC innerduct and PVC schedule 40 and schedule 80 as well. We STOCK schedule 40 and Schedule 80 in several areas of the USA. Please call for availability. Also much of our new 2 inch- 3 inch and 4" HDPE innerduct is now in stock.

THE BELOW PRICES ARE TYPICAL SUGGESTED PRICES- DUE TO THE PRICE OF OIL- THE PRICES CAN FLUCTUATE DAILY-PLEASE CALL (866) 342-3721 FOR UP TO DATE PRICING- WE TRY AND SHIP COILED 250 FOOT AND 500 FOOT PLENUM INNERDUCT SAME DAY!

Call us for a quote at (866) 342-3721

We now STOCK in Tampa & Texas Schedule 40- 4" Duct- The Schedule 40 & Schedule Comes in 10 and 20 Foot Lengths or "sticks"- More Info-Link

We are now QUOTING & Shipping HDPE 1"-2"-3"-4" HDPE Innerduct:

• 1" SDR 11 HDPE Innerduct- More Info
• 1" SDR 13.5 HDPE Innerduct - More Info
• 1 1/4" SDR 11 Innerduct- More Info
• 1 1/4" SDR 13.5 Innerduct- More Info
• 1/1/2" SDR 11 Innerduct -More Info
• 1/1/2" SDR 13.5 Innerduct -More Info
• 2" SDR 11 HDPE Innerduct - More Info
• 2" SDR 13.5 HDPE Innerduct - More Info
• 2" Schedule 40 Innerduct - More Info
• 2" Schedule 80 HDPE Innerduct - More Info
• 3" SDR 11 Innerduct - More Info
• 4" SDR 11 HDPE Innerduct - More Info
• 4" SDR 13.5 HDPE Innerduct - More Info
• 4" Schedule 40 Innerduct - More Info
• 4" Schedule 80 HDPE Innerduct - More Info

West Coast (866) FIBER-21 -------------------------(866) 342-3721----------------------- East Coast (866) 650-3282

American Tech Supply is an active CCR registered supplier for the United States Government

We Can Ship the Same Day! Many Colors Available

We specialize in custom lengths of innerduct- call for innerduct pricing today at (866) 342-3721

Standard colors include black, gray, red, white, blue, yellow, green, orange and terra cotta. Custom colors available on request. Other options include embedded stripes, sequential marking and Cable-In-Conduit.

SMOOTHWALL INNERDUCT- Click here for more info on complete specifications-

Smoothwall Innerduct- 1/2" TO 6" Innerduct Diameter Sizes

Click here for more info on complete specifications

	SMOOTHWALL INNERDUCTHigh Density Polyethylene Duct from PNA has been tested and proven under the most severe conditions. From extreme temperatures to abrasive and high tension applications in underground installations. HDPE from PNA provides quality service and economy in a wide range of uses. As a smooth and flexible duct for cable, HDPE is unequaled for ease of installation and continuous strength.
Sizes Available 13mm 1/2" 3/4" 1" 1-1/8" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 5" 6"	Click here for more info on complete specifications

American Tech Supply also carries HDPE innderduct-high density polyethylene innerduct in sizes ranging from 1/2" to 6" and is available in a multitude of colors. Smooth wall is the standard High Density Polyethylene (HDPE) Duct. The interior of smooth wall has a glass-like finish which delivers the lowest coefficient of friction of all available non-lubricated innerducts. Our smooth wall innerduct is a durable high quality product for direct burial applications.The sizes below are from 1" to 4" and many below are in STOCK-CALL

• Made from tough High Density Polyethylene (HDPE). • Flexible and can be worked easily in tight areas. • Excellent low temperature properties. • Superior resistance to natural or mechanical damage. • Available with sequential markings in feet or meters.• Smoothwall is available with SILICORE® Super Slick Permanent Lining.

Smoothwall Ribbed Corrugated Figure 8 Aerial Piggyback Pinpoint Cablecon Plenum (Fire Jacket) Microduct Accessories

___________________________________________________________________

Ribbed Smmothwall Innerduct-Ribbed Smmothwall Innerduct-Ribbed Smmothwall Innerduct

	Ribbed Smmothwall InnerductFor specialized installation of underground cable, including fiber optics, Petro-Rib™ duct provides superior friction reduction and flexibility. Manufactured from quality High Density Polyethylene resin, Petro-Rib™ offers maximum strength and adaptability on long pulls with numerous turns and elevation changes. PetroRib™ also affords superior pulling ease and lubrication effectiveness when installed with ProPull™ All PetroDuct™ is available pre-lubed, with pulling rope pre-installed; and in other sizes and lengths as a special order.  Joints are available in all sizes.
Sizes Available 13mm 1/2" 3/4" 1" 1-1/8" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 5" 6"	Colors Available Blue, Orange, Black, Green, Gray, Red, Yellow, White, Terra Cotta.

ATS also carries Ribbed wall innerduct which innerduct is designed to allow extremely long cable pulls to glide through the interior raised ribs. All ribbed wall innerduct is internally ribbed and available in any SDR and SIDR rating.

_____________________________________________________________________________

CORRUGATED INNERDUCT - CORRUGATED INNERDUCT-CORRUGATED INNERDUCT

	For specialized installation of underground cable, PetroDuct™ Corrugated Duct provides excellent friction reduction and superior flexibility. Manufactured from quality High Density Polyethylene, PetroDuct™ Corrugated Duct offers maximum flexibility in tight turns combined with light weight and superior economy. Corrugated PetroDuct™ affords maximum pulling ease and lubrication effectiveness when installed with ProPull™ All PetroDuct™ is available pre-lubed, with pulling rope pre-installed; and in other sizes and lengths as a special order.  Joints are available in all sizes.
Sizes Available 1", 1-1/4", 1-1/2", 2"	Colors Available Blue, Orange, Black, Green, Gray, Red, Yellow, White, Terra Cotta.

___________________________________________________________________

Corrugated Duct We offer all corrugated HDPE ranging from 1” to 2” in diameter.

Product Part # SDR/SCH Rating Nominal O.D. Min I.D. Min Wall Max Wall Weight lbs/ft. Mean Density Mean Wall PC100 N/A 1.300 1.000 0.50 0.080 0.1051 0.950 0.066 PC100-FR N/A 1.300 1.000 0.50 0.080 0.1051 0.950 0.066 PC100-PL N/A 1.300 1.000 0.014 0.034 0.1001 0.950 0.024 PC125 N/A 1.540 1.250 0.50 0.080 0.1502 0.950 0.060 PC125-FR N/A 1.540 1.250 0.50 0.080 0.1502 0.950 0.060 PC125-PL N/A 1.540 1.250 0.017 0.031 0.1450 0.950 0.024 PC200 N/A 2.315 2.000 0.030 0.050 0.1902 0.950 0.040 PC200-PL N/A 2.375 2.00 0.015 0.035 0.2300 0.950 0.025 PC=Corrugated    PL=Plenum Rated    FR=Flame Retardant

___________________________________________________________________

Plenum Innerduct------Plenum Innerduct---------Plenum Innerduct

Plenum Innerduct	Standard Specifications for Plenum-Rated PetroDuct™

Product Part # SDR/SCH Rating Nominal O.D. Min I.D. Min Wall Max Wall Weight lbs/ft. Mean Density Mean Wall PC100 N/A 1.300 1.000 0.50 0.080 0.1051 0.950 0.066 PC100-FR N/A 1.300 1.000 0.50 0.080 0.1051 0.950 0.066 PC100-PL N/A 1.300 1.000 0.014 0.034 0.1001 0.950 0.024 PC125 N/A 1.540 1.250 0.50 0.080 0.1502 0.950 0.060 PC125-FR N/A 1.540 1.250 0.50 0.080 0.1502 0.950 0.060 PC125-PL N/A 1.540 1.250 0.017 0.031 0.1450 0.950 0.024 PC200 N/A 2.315 2.000 0.030 0.050 0.1902 0.950 0.040 PC200-PL N/A 2.375 2.00 0.015 0.035 0.2300 0.950 0.025 PC=Corrugated    PL=Plenum Rated    FR=Flame Retardant

___________________________________________________________________

Plenum Innerduct- by Premier

1" & 1.25" Plenum Innerduct- Is In "RED"- Below-

[Prices do not include shipping, FOB point PA]
Plenum innerduct is offered in 1"and 11/4", with pre-installed pull tape for easy cable installation. The standard color is orange and is offered in a variety of other colors. Sequential marked footage is standard. Custom options, such as multiple colors per reel and Slit Duct, are also available.American Tech Supply provides turnaraound for corrugated innerduct by providing rapid shipping service that we have in stock including a complete Line of ETL verified Innerduct, plenum innerduct, fiber optic duct, conduit and raceway systems including Fiber Duct, Outside Plant Conduit, Plenum Innerduct, Riser Rated Innerduct, Toneable Duct, Corrugated Innerduct and more. Corrugated HDPE Premier Corrugated HDPE is manufactured from High Density Polyethylene (HDPE) and is intended to be placed inside of existing innerduct. Plenum innerduct is ideal for pulls under 1000 ft. and is designed to reduce surface contact when pulling cable. Our plenum innerduct is a flexible, non-metallic, corrugated raceway used for effective cable and fiber optic management within interior raceways.

-PLEASE CALL (866) 342-3721 FOR UP TO DATE PRICING-Pricing for 1" & 1.25" HDPE Innerduct *HDPE orders under 5000 ft subject to a $60.00 reel charge, Coil prices listed

FIRE RETARDANT INNERDUCT

	Fire-Retardant (FR) in corrugated duct - Orange only. Fire-Retardant duct has been has been tested and is offered in the top class (UL94 V-O only.  Because the process of making Fire-Retardant duct eliminates UV protection, it must be installed safe from exposure to natural or any other UV light. All PetroDuct™ is available pre-lubed, with pulling rope pre-installed; and in other sizes and lengths as a special order.  Joints are available in all sizes.
Sizes Available 1", 1-1/4", 1-1/2", 2"	Colors Available Orange-White.

FIRE RETARDANT INNERDUCT SPECIFICATIONS

Product Part # SDR/SCH Rating Nominal O.D. Min I.D. Min Wall Max Wall Weight lbs/ft. Mean Density Mean Wall PC100 N/A 1.300 1.000 0.50 0.080 0.1051 0.950 0.066 PC100-FR N/A 1.300 1.000 0.50 0.080 0.1051 0.950 0.066 PC100-PL N/A 1.300 1.000 0.014 0.034 0.1001 0.950 0.024 PC125 N/A 1.540 1.250 0.50 0.080 0.1502 0.950 0.060 PC125-FR N/A 1.540 1.250 0.50 0.080 0.1502 0.950 0.060 PC125-PL N/A 1.540 1.250 0.017 0.031 0.1450 0.950 0.024 PC200 N/A 2.315 2.000 0.030 0.050 0.1902 0.950 0.040 PC200-PL N/A 2.375 2.00 0.015 0.035 0.2300 0.950 0.025 PC=Corrugated    PL=Plenum Rated    FR=Flame Retardant

______________________________________________________________

MAXCELL MULTICELL INNERDUCT

This Maxcell innerduct lightweight product offers maximum flexibility, and allows for installation in small or restricted areas. Our Corrugated innerduct is available in 1" and 1 1/4". The standard color is orange and is offered in a variety of other colors. Sequential marked footage is standard. Custom options, such as multiple colors per reel and Slit Duct, are also available.American Tech Supply now carries Maxcell's new fabric innerduct which is similar to the Maxcell fabric innerduct but has several major differences to the Maxcell innerduct product which will be covered below. Maxcell is the very popular fabric innerduct product that have successfully offered several advantages over standard HDPE especially offering up to 80% fill ratios over standard innerduct. Maxcell also has several differences over innerduct in the type of composite materials that it is manufactured from as well as the type of cellular structure.

New Maxcell Fabix Multicell Duct- More Info

_______________________________________________________________________________

We carry a complete line of innerduct including ribbed innerduct, pinpoint innerduct, plenum innerduct, figure 8 innerduct and more. Our High Density Polyethylene (HDPE) Innerduct is made of 100% Virgin Resin. The Innerduct can be manufactured in almost any color and has outstanding UV protection. Orange, Black, Red, Blue and Green are the most common conduit colors. We can provide multiple duct and colors on one reel to maximize space in a trench. All of our Innerduct is sequencally marked every foot and can be purchased with or without pull tape. The Innderduct has a silicore lining on the inside to prevent cable drag friction. SDR wall thicknesses are contingent on the type of projects projected. Schedule 40, SDR 15.5, SDR 13.5, SDR 11 and SDR 9 are all standard wall thickness.

NEW! Firestop Cable Transit Systems Snake Tray Cabletray-Raceway Systems

Innerduct Couplers-Please Click Here Innerduct Couplers

Click On Anyone of the Below Links For Additional Innerduct Information

We specialize in custom lengths of innerduct- call for innerduct pricing today at (866) 342-3721

Our Tracer wire innerduct provides a method of locating underground fiber optic cable. The tracer wire is a single copper wire co-extruded into the innerduct providing a corrosion resistant conductor. An alternative method of locating buried fiber optic cable is to use detectable tape, available pre-installed in any of our duct products.

UL Listed-We Now Offer Pre- Installed Fiber Cable In Our Innerduct- Ask Us For Details- (866) 342-3721

ATS can ship many HDPE innerduct and HDPE duct products the same day, however on special orders and colors please be advised that we require 7-10 days to process your innerduct order. Thank you.

1/2" TO 6" Innerduct Diameter Sizes Innerduct Couplers

Colors and Identification

• Standard colors available in: white, black, blue, green, red, orange, lilac, grey, yellow, brown, buff, terra cotta.
• Striping: Striping combinations are available in all colors in combinations of single, double, triple and quad stripes.

Other Identification

• Innerduct size, SDR and sequential footage markings every 2’ are laser imprinted on every order.
• Custom imprints such as company name, project name or any other special identification markings also available

Options

• Lubrication
• Up to four lengths/colors of innerduct per reel available laid in parallel or segmented on a reel.
• Pre-installed pull tape, tracer tape

	Smooth Wall Innerduct 1/2" to 6" Diameter HDPE Smooth wall innerduct is the standard High Density Polyethylene (HDPE) Duct. The interior of smooth wall has a glass-like finish which delivers the lowest coefficie