Most Popular Accessories for the GL840LE-3048 |
Doors |
8402E-MC29 |
Contour Mesh Door |
8402E-29SM |
Split Mesh Steel Door |
8403E-SF29 |
Split Fan Door Set |
8404E-29 |
Perimeter Vented Steel Door |
Removable Top Panels |
TPES-S |
ES & LE Solid top panel |
TPES-P |
ES & LE Perforated top panel |
TPES-F |
ES & LE top panel with fan assembly |
TPES-F10 |
ES & LE top panel with 550 CFM 10″ fan |
TPES-2F10 |
ES & LE top panel with two 550 CFM 10″ fans |
Cable Management |
BGS-84 |
Brush Grommet Kit (side access) |
CMP |
Single Cable Management Post, 3.00″H |
CMP-8 |
Package of 8 Cable Managements Posts, 3.00″H |
LRB-12 |
Ladder Rack Support Bracket Kit, 12″W (includes two brackets and hardware) |
LRB-24 |
Ladder Rack Support Bracket Kit, 24″W (includes two brackets and hardware) |
LE-CM |
Vertical Cable Management Tray (to be used in rear of enclosure) |
HCM-D36 |
Horizontal cable management (front to rear), 36″D |
TCT30 |
Top Cable Trough Kit for 30″W ES and LE Enclosure |
VCT-84 |
Vertical Cable Trough |
VLB-8436 |
Vertical Lacing Bar Kit for 84″H ES Enclosure (includes 1 vertical and 2 horizontal bars and 6 cinch straps) |
Power Strips
|
7215-20AR |
16 position, 20 amp Power Strip with circuit breaker, 5-20P plug and 15 ft. cord |
7215-20ARTLP |
16 position, 20 amp Power Strip with circuit breaker, L5-20P plug and 15 ft. cord |
7215-30A |
30 amp Power Strip with two banks of 12 NEMA 5-20R receptacles and L5-30P plug |
Filler Panels
|
|
1.75″H tool-less filler panel for 19″ mounting on M6 rails, 1 RMU |
3.50-FPTL19 |
3.50″H tool-less filler panel for 19″ mounting on M6 rails, 2 RMU |
5.25-FPTL19 |
5.25″H tool-less filler panel for 19″ mounting on M6 rails, 3 RMU |
7.00-FPTL19 |
7.00″H tool-less filler panel for 19″ mounting on M6 rails, 4 RMU |
8.75-FPTL19 |
8.75″H tool-less filler panel for 19″ mounting on M6 rails, 5 RMU |
14.00-FPTL19 |
14.00″H tool-less filler panel for 19″ mounting on M6 rails, 8 RMU |
Cooling Equipment |
7217FT |
Fan assembly with fan guards and three 75 CFM fans, 19″ rack mounted, 2 RMU |
7217FT-3 |
Fan tray (adjustable front to back) with fan guards and three 75 CFM fans, 19″ rack mounted, 2 RMU |
7217FT-6 |
Fan tray (adjustable front to back) with fan guards and six 75 CFM fans, 19″ rack mounted, 2 RMU |
7217FT-9 |
Fan tray (adjustable front to back) with fan guards and nine 75 CFM fans, 19″ rack mounted, 2 RMU |
7217-LE1 |
Fan assembly with fan adaption plate (installs in rear top of enclosure) |
FTBKT90 |
Fan bracket to mount the 7217FT at a 90 degree angle |
FTC101 |
Fan Thermostat Controller, Thermostat controlled 15 amp duplex outlets, UL listed, CSA certified thermostat, 50° to 90°F / 10° to 30°C temperature range, 6 ft. cord. |
FTC102 |
Remote or Local Access Fan Control Unit. Thermostat range between 60-100° F. UL and c-UL Listed 60950; compatible with Shaded Pole and Split Capacitor Fans; 1 RMU (cord required) |
PC13-515P |
Power cord for fan controller, 5′6″ length, 2 required for dual a/c input (125 Volts) |
PCP13-C14 |
Power cord for fan controller, 3′3″ length, 2 required for dual a/c input (125/250 Volts) |
GLST-12 |
Temperature Sensor, 12 ft. |
Other Accessories |
LE-DP |
Divider panels to separate power from data |
LE-BKT |
Top Bonnet, needed to accept remote display |
LE-BKT-DSP |
Top Bonnet with remote display |
HDW-105-25 |
Package of 25 M6 Cage Nuts with Screws, 12mm screw length |
HDW-105-50 |
Package of 50 M6 Cage Nuts with Screws, 12mm screw length |
The Lake Effect Enclosure is a Registered Trademark of Great Lakes Case & Cabinet Co., Inc. |