Indoor Fiber Optic Cable- Multimode Fiber Optic Cable, Indoor-Outdoor FIber Optic Cable- Loose Tube Fiber Optic Cable- 10 Gigabit FIber Optic Cable   Multimode Fiber Optic Cable   Link- Indoor/Outdoor 12-Strand, 62.5-Micron Multimode Fiber Optic Cable Multimode, 50-Micron, Distribution-Style Fiber Optic Bulk Cable Get it here! The 50-micron cable you want with high fiber counts! Multimode, 50-Micron, Breakout-Style Fiber Optic Bulk Cable Tight-buffered, 50-micron cable that’s ideal for high-bandwidth voice, data, video, and imaging signals Multimode, 62.5-Micron, Distribution-Style, Custom-Length Bulk Fiber Optic Cable Run 62.5-micron tight-buffered cable in the exact lengths you want. Interlocking Armored, 12-Strand, 62.5-Micron Multimode Fiber Optic Cable No more pulling fiber through ducts. This cable has flexible armor for maximum protection. Singlemode Fiber Optic Cable         ADSS Fiber Optic Cable ezSPAN ADSS Short Span Rated performance3 up to 1,000' (300m) spans typical in distribution ezSPAN ADSS Long Span Rated performance up to 2,500' (760m) spans typical in transmission.     Armored Fiber Optic Cable Interlock Armor Indoor Interlock Armoring can be applied to any indoor cable for protective crush resistance & fire safety. These cables also eliminate the need for conduit - providing quick one-step economical Installation.     Breakout Fiber Optic Cables ezBREAKOUT Indoor Package up to 24 individually jacketed breakout units with tight buffered fibers into a single flame-retardant cable. This design provides simple direct field termination with strain relief.     Central Tube Fiber Cable The AccuRibbon Cable with gel-based water blocking offers a higher number of fibers in a smaller cable for ultimate space efficiency.  This cable accomodates fiber counts up to 576 within a 0.75 in (19.0 mm) diameter and up to 864 fibers within less than a one-inch (24.4 mm) diameter. The Accuribbon cable is available in both dielectric and metallic sheaths.     Composite Fiber Optic Cable Various combinations of copper conductors and optical fibers in a single composite cable Other data and voice grade, or power conductors are available-Larger gauge wires overcome powering distance limitations of CAT 3 and CAT 5 -Copper and fiber individually subcabled for ease of separation, handling, and termination-Round cable design for easy installation and survivability-Many combinations available with Riser-ratings or Plenum-ratings Excellent chemical-resistant outer cable jacket for inside/outside plant environments     Custom Fiber Optic Cable Riser-rated cables are available with a very flexible outer cable jacket Our Easy Strip options permit easily removing long lengths (20-30 cm) of the 900 µm buffer and leaving the 250 µm acrylate coating. This is well suited when the 900 µm buffer must be removed to allow for splicing or ribbonizing. Tubed on outer cable jackets are available on D-Series and DX-Series Distribution Cables, G-Series and GX-Series Subgrouping Cables, and B-Series and BX-Series Breakout Cables MT-RJ Cable Plenum-rated cables are available with a flexible outer cable jacket     Distribution Fiber Optic Cables ezDISTRIBUTION Indoor Package up to 144 color-coded tight buffered fibers into a single flame-retardant cable. This design provides for easy installation and direct termination.  Indoor riser, plenum or LSZH-rated tight buffer distribution cable. ezDISTRIBUTION Indoor-Outdoor Package up to 144 color-coded tight buffered fibers into a single flame-retardant cable. This design provides for easy installation and direct termination.  Dual-Purpose Indoor-Outdoor in riser or plenum versions.   Drop Cable ezDROP Flat Provide easy FttX (fiber-to-the-X) installation and termination using existing hardware and methods for drops to homes and businesses. Popular flat design is compatible with drop wire clamps - dielectric and toneable versions. ezDROP Ribbon Provide easy FttX (fiber-to-the-X) installation and termination using existing hardware and methods for drops to homes and businesses. Combines flat profile with 4 or 6-fiber ribbons - in dielectric and toneable versions.   Drop Cable- Figure 8 Drop Cable ezDROP Figure 8 Provide easy FttX (fiber-to-the-X) installation and termination using existing hardware and methods for drops to homes and businesses. Fiber drop cable with "figure 8" integrated messenger for self-support and/or underground location.     Dry Core Fiber Optic Cable The AccuRibbon DC cable is a totally dry-core cable containing absolutely no gels or messy filling compounds, allowing for significant improvements in handling and installation time. It incorporates a patented, super-absorbent tape in the central tube that results in almost effortless splice preparation. The cable accommodates from 12 to 432- fibers in 1 to 18 high fiber density AccuRibbon units, that allow easy mass fusion splicing and maximum usage of duct space     FTTX Cable Fortex™ DT Loose Tube Cable The Fortex DT Loose Tube cable is a completely dry cable offering superior handling and excellent durability for a broad range of applications. It delivers the rugged durability and reliability essential for outside plant use in an innovative, totally dry cable design. By eliminating messy gels and filling compounds, the Fortex DT cable can streamline cable handling and installation. The AccuRibbon DC cable is a totally dry-core cable containing absolutely no gels or messy filling compounds, allowing for significant improvements in handling and installation time. It incorporates a patented, super-absorbent tape in the central tube that results in almost effortless splice preparation. The cable accommodates from 12 to 432- fibers in 1 to 18 high fiber density AccuRibbon units, that allow easy mass fusion splicing and maximum usage of duct space.   Indoor/Outdoor Fiber Optic Cable ezPREP Loose Tube Indoor-Outdoor Provide dual-prupose use for easy and economical building transition. Available in riser, plenum or LSZH rated versions. ezSPREP Gel-Free Loose Tube Indoor-Outdoor Provide dual-prupose use for easy and economical building transition. Available in riser, plenum or LSZH rated versions.   Indoor/Outdoor Fiber Optic Cable- Harsh Envirionment ezPREP Loose Tube Harsh Environment Designed with heavy duty protection from harsh chemicals & solvents for industrial applications and other harsh environments.     Loose Tube Fiber Optic Cable ezPREP Loose Tube Indoor-Outdoor Provide dual-prupose use for easy and economical building transition. Available in riser, plenum or LSZH rated versions. ezRIBBON Loose Tube Combine robust performance for aerial lashed, duct, and direct buried installations with the productivity of mass fusion splicing   Loose Tube Fiber Optic Cable- Figure 8 DryBLock ™ Loose Tube Cable Fulfilling the needs for every situation, OFS offers a complete line of loose tube gel filled cables, including  designs for duct, direct buried, aerial (lashed and self-supporting), and outdoor/indoor applications Fortex™ DT Loose Tube Cable The Fortex DT Loose Tube cable is a completely dry cable offering superior handling and excellent durability for a broad range of applications. It delivers the rugged durability and reliability essential for outside plant use in an innovative, totally dry cable design. By eliminating messy gels and filling compounds, the Fortex DT cable can streamline cable handling and installation.   Low Smoke -Zero Halogen Fiber Optic Cable Low Smoke Zero Halogen (LSZH) Low Emission Meet low emission requirements for fire safety in hospitals, subways, airports, building and other crowded spaces. Available in distribution, breakout and loose tube designs.     Microcable & Blown Fiber Optic Cable AccuRibbon DuctSaver™ FX Cable The AccuRibbon DuctSaver FX cable is an innovative cable, specifically designed for air-blown installation applications. With its small outer diameter and lightweight design, the AccuRibbon DuctSaver FX cable helps maximize the most important advantage of air-blown applications: a fast and easy installation.     Military Cables Extremely strong, lightweight, rugged, survivable tight-buffered cables designed for military tactical field use and commercial applications Breakout cable design with an individual color-coded subcable surrounding each optical fiber Crush-resistant and resilient, with two separate layers of aramid strength members -- in the subcables for individual single-fiber connector termination, and overall for termination to multiway connector backshells or other housings Helically stranded cable core for flexibility, survival in difficult pulls, and exceptional mechanical protection for the optical fibers     Military Cables Extremely strong, lightweight, rugged, survivable tight-buffered cables designed for military tactical field use and commercial applications Breakout cable design with an individual color-coded subcable surrounding each optical fiber Crush-resistant and resilient, with two separate layers of aramid strength members -- in the subcables for individual single-fiber connector termination, and overall for termination to multiway connector backshells or other housings Helically stranded cable core for flexibility, survival in difficult pulls, and exceptional mechanical protection for the optical fibers     Mining Fiber Optic Cables       Ribbon Fiber Optic Cable ezRIBBON Central Tube Combine robust performance for aerial lashed, duct, and direct buried installations with the productivity of mass fusion splicing ezRIBBON Gel-Free Central Tube Combine robust performance for aerial lashed, duct, and direct buried installations with the productivity of mass fusion splicing   Premises Fiber Optic Cable Premises Distribution and Breakout Cables Optical Fiber Building Cables from OFS fall into one of four categories. ACCUMAX® Distribution Cables, Ribbon Riser and AccuFlex® Ribbon Cable, Breakout Cables, and AccuDRY® Indoor/Outdoor Cables               Specialty Fiber Optic Cable                           Indoor Fiber Optic Cables Indoor-Outdoor Fiber Optic Cables Outdoor Fiber Optic Cables LAN Fiber Optic Cables Gigabit Fiber Cables                   Loose Tube Figure 8 Self-support aerial deployment and quick installation using existing Figure 8 hardware.   Its Extra High- Strength galvanized steel support messenger can support spans up to 600' (180m         Central Loose Tube A better fit and cost-effective alternative for low fiber count designs, this cable provides easy cable entry and flexible routing for multi-purpose installations           Loose Tube Heavy Duty Provide robust performance for installations under extreme cold.                 American Tech Supply is one of the leading suppliers of Fiber Optic Cable in the USA stocking hundreds of thousands of feet of Fiber Optic Cable that are ready to ship same day including all types of singlemode fiber optic cable, multimode fiber optic able, loose tube Fiber Optic Cable- tight buffer Fiber Optic Cable, aerial Fiber Optic Cable, indoor outdoor Fiber Optic Cable, ADSS cables, figure 8 Fiber Optic Cable, military Fiber Optic Cable, armored Fiber Optic Cable, tactical Fiber Optic Cable- and more in singlemode fiber, mulimode fiber and multifiber combinations. ATS can provide you fiber optic cables from many manufacturers depending on you network fiber needs.   Our warehouses across the USA stock most of the Fiber Optic Cable we have on our website but please call us for the latest fiber cable availability for your needs as at (866) 342-3721 and let one of customer technical executives assist you in your fiber cable selection.   Please scroll down to your specific cable and follow the links to the available fiber cable lists as there are just too many to list on one page. Multimode Fiber Optic Cable- More Info We stock thousands of feet of Multimode Fiber Cable- visit our wholesales fiber cable -here- Singlemode Fiber Optic Cable- More Info We stock thousands of feet of Singlemode Fiber Cable- visit our wholesales fiber cable -here- Indoor-Outdoor Fiber Optic Cable- More Info We stock thousands of feet of Indoor Outdoor Fiber Cable- visit our wholesales fiber cable -here-   We Carry Fiber Optic Cable-Wholesale Fiber Optic Cable-Bulk Fiber Optic Cable and The Complete Lines of CAT 5e , CAT 6, Coax & Specialty Cable From The Following Manufacturers

American Tech Supply is one of the leading suppliers of Fiber Optic Cable in the USA stocking hundreds of thousands of feet of Fiber Optic Cable that are ready to ship same day including loose tube Fiber Optic Cable, tight buffer Fiber Optic Cable-, aerial Fiber Optic Cable- indoor outdoor Fiber Optic Cable- ADSS cables, figure 8 Fiber Optic Cable-, military Fiber Optic Cable- armored Fiber Optic Cable- tactical Fiber Optic Cable- and more in singlmode fiber, mulimode fiber and multifiber combinations- Call us at (866) 342-3721 and let one of customer technical executives assist you in your fiber cable selection.

• Visit Our Draka Cable Current inventory of Fiber Optic Cable
• Visit Our Draka Cable Current inventory of Fiber Optic Cable
• Visit Our Draka Cable Current inventory of Fiber Optic Cable
• Visit Our Draka Cable Current inventory of Fiber Optic Cable
• Visit Our Draka Cable Current inventory of Fiber Optic Cable
• Visit Our Draka Cable Current inventory of Fiber Optic Cable
• Premise Zip Cord Fiber Optic Cable- More Info
• Premise Tight Buffer Breakout Riser Fiber Optic Cable- More Info
• Premise Tight Buffer Breakout Plenum Fiber Optic Cable- More Info
• Premise Tight Buffer Distribution Riser Fiber Optic Cable- More Info
• Premise Tight Buffer Distribution Plenum Fiber Optic Cable- More Info
• Indoor/Outdoor Tight Buffer Distribution Riser Fiber Optic Cable- More Info
• Indoor/Outdoor Tight Buffer Distribution Plenum Fiber Optic Cable- More Info
• Indoor/Outdoor Central Tube Single Jacket Riser Fiber Optic Cable- More Info
• Indoor/Outdoor Central Tube Single Jacket Plenum Fiber Optic Cable- More Info
• Indoor/Outdoor Loose Tube Single Jacket Riser Fiber Optic Cable- More Info
• Indoor/Outdoor Loose Tube Dual Jacket Riser Fiber Optic Cable- More Info
• Indoor/Outdoor Loose Tube Single Jacket Plenum Fiber Optic Cable- More Info
• Outside Plant Central Loose Tube Single Jacket Non-Armored Fiber Optic Cable- More Info
• Outside Plant Central Loose Tube Single Jacket Armor Fiber Optic Cable- More Info
• Outside Plant Loose Tube Single Jacket Fiber Optic Cable- More Info
• Outside Plant Loose Tube Dual Jacket Fiber Optic Cable- More Info
• Outside Plant Loose Tube Single Jacket Single Armored Fiber Optic Cable- More Info
• Outside Plant Loose Tube Dual Jacket Single Armored Fiber Optic Cable- More Info
• Outside Plant Loose Tube Triple Jacket Dual Armored Fiber Optic Cable- More Info
• Outside Plant Loose Tube Single Jacket Self Supporting (Figure 8) Fiber Optic Cable- More Info
• Outside Plant Loose Tube Dual Jacket Armored Self Supporting (Figure 8) Fiber Optic Cable- More Info

Aerial Fiber Optic Cable- More Info-We carry aerial (ADSS- Self supporting cables from AFL, Draka (formerly Alcatel) and Fiber Fab- the AFL Telecommunications' full line of All-Dielectric Self-Supporting Aerial (ADSS) Cables meet the demanding needs of transmission and distribution environments. This high-capacity cable offers great flexibility for placement on overhead transmission towers, eliminating the need for a support messenger. Aerial (figure-8) cable is designed to be self supporting via an integrated steel supporting wire. The cables are well suited for all external environments between buildings and on overhead transmission lines. The cables provide the durability and flexibility required for outside use and are constructed to withstand long term exposure to weather and UV

Armored Fiber Optic Cable- More Info-Cable is suitable for direct burial and aerial applications, as well as indoor/outdoor-Corrugated steel tape (CST) protects the Fiber Optic Cable- More Info from rodents and provides additional stiffness for aerial lashing, if required- More Info

AX Series Assembly Fiber Optic Cable- More Info-Resilient and flexible for jumpers, patch cords and pigtails -Suitable for general purpose indoor use, such as routing connections in patching systems

Breakout Fiber Optic Cable- More Info- Most rugged and "installer friendly" cable design for Local Area Networks-For installations where ease of termination and termination costs are important factors

Composite Fiber Optic Cable- More Info- Various combinations of copper conductors and optical fibers in a single composite cable -Other data and voice grade, or power conductors are available -Larger gauge wires overcome powering distance limitations of CAT 3 and CAT 5

Custom Fiber Optic Cable- More Info- Indoor only cables are available -Riser-rated cables are available with a very flexible outer cable jacket

Distribution Fiber Optic Cable- More Info- Used in trunking, LAN, and distribution applications where small size, lightweight, and versatile installation capability are required -Suitable for both indoor and outdoor use - no need to splice outdoor cable to indoor cable at the building entrance

Festoon Fiber Optic Cable- More Info-Flexible, rugged, polyurethane outer cable jacket -Each fiber has military-grade 900 µm buffer with aramid strength members and 2.5 mm subcable jacket for excellent fiber protection -Resistant to oils, gases, and acidic gases

Furcation Fiber Optic Cable- More Info- Ideal for adding protection and strength to coated or buffered fibers. Sizes: 450/900 for 250 µm acrylate fibers 1100/1500 for 900 µm buffered fibers -Tubing for typical termination of loose-tube fibers

Fiber to The Curb Cables-Draka's ezDROP cables provide easy FttX (Fiber-to-the-X) installation and termination using existing hardware and methods for drops to homes and businesses.  Portable boxes and spools simplify widespread deployment, and preconnectorized ezDROP cables enable plug & play connectivity for quick subscriber additions.  Draka's exclusive BendBright fiber provides craft-friendly bend tolerance over the entire singlemode wavelength spectrum.

Hybrid Fiber Optic Cable- More Info-Hybrid fiber + coax-Hybrid fiber + UTP cable-Hybrid fiber + coax + UTP cable-Hybrid cables are for applications requiring both multimode and single-mode optical fibers within one jacket -Hybrid cables can be UL rated for either riser or plenum environments

Military-Specialty/Tactical Fiber Optic Cable- More Info-/Military-Extremely strong, lightweight, rugged, survivable tight-buffered cables designed for military tactical field use and commercial applications -Breakout cable design with an individual color-coded subcable surrounding each optical fiber

Mining Fiber Optic Cable- More Info- multi-channel fiber optic connectors and custom made cable assemblies are being extensively applied in underground longwall installations with outstanding success. These assemblies enable the mine operator to quickly install a fiber optic communications network from the surface all the way to the longwall face, including the longwall services monorail system. Sections of the Fiber Optic Cable- More Info can be quickly and easily removed as the longwall face retreats, and relocated to the next longwall setup, eliminating the expensive loss of Fiber Optic Cable- More Info usually experienced in more traditional installations incorporating mechanical splices. And the special Kevlar reinforced tactical Fiber Optic Cable- More Info used in Fiber Systems International's mining assemblies are specially designed and ideally suited for the harshest mining applications.

Subgrouping Fiber Optic Cable- More Info- Tight-buffered multifiber cable design allows subcables to be routed to multiple locations such as in wiring racks or wiring closets -Core-Locked™ outer jacket surrounds the subcables for excellent crush resistance, survivability, and use in long vertical installations

Tight Buffer Fiber Optic Cable- More Info- Indoor/outdoor tight buffer riser and plenum Fiber Optic Cable- More Infos are ideally suited for installations that require partial or complete routing of pathways outside the building. These cables can be installed in conduits, inner-ducts and steam tunnels, as well as within building riser and plenum locations.

Water-blocked Fiber Optic Cable- More Info-(dry technology), sunlight resistant indoor/outdoor tight buffer riser rated cable line offers the system designer the ultimate in premises Fiber Optic Cable- More Info utility. These cables can be installed in open spaces, trays, conduits, inner-ducts, trenches, steam tunnels and building riser locations.

Zipcord Fiber Optic Cable- More Info-Duplex Zip cord Cables consist of two single fibers, each with a color coded semi-tight buffer. These are reinforced with aramid yarn to provide physical protection and tensile strength to the cable. These cables are the ideal solution for interconnecting patch panels.

Loose Tube Fiber Optic Cable- More Info: Loose Tube Optic Outside Plant Cable is right for any outside plant application. Our loose tube cable constructions are built to withstand adverse environments and provide the maximum fiber protection. They can be installed in ducts, direct buried and aerial/lashed installations for trunk and fiber to the premise applications. Our outside plant products conform to TIA/EIA, ICEA, Telcordia and RUS standards. 

Tight Buffer Fiber Optic Cable- More Info: Tight Buffered Fiber Optic is right for any premise application. Our 900ųm tight buffer premise cable constructions are built to withstand continuous handling as well as difficult routing, both of which are typical in the premise environment. Ideal for both backbone and horizontal applications, 900ųm premise cables allow for the direct termination of connectors, saving installation time and reducing connectorization costs. ATS offers a complete line of totally dry outside plant (OSP) cables. By eliminating messy gels and filling compounds the handling and installation process is greatly streamlined, resulting in higher efficiencies. These cables are available in both loose tube or ribbon structures with dielectric and metallic sheath options.

Indoor Outdoor Fiber Optic Cable- More Info: Fiber Optic Indoor/Outdoor Cables are designed to meet both the stringent environmental requirements typical of outside plant cable AND the flammability requirements of premise applications. Ideal for applications that span indoor and outdoor environments, Indoor/outdoor cable can eliminate the need for building entryway splice points, saving both time and money.  Outdoor/Indoor cables combine the flame resistance and safety features of an indoor riser or plenum cable with the durability that is critical for OSP use. The result is a unique, dual-purpose cable that can save time and money by allowing OSP applications to flow seamlessly indoors, using a single cable and no splices.

Interconnect Fiber Optic Cable- More Info: Interconnect Cables can be used for horizontal fiber-to-the-desk (FTTD) cabling or can be terminated into pigtails and patchcords for use in data centers or wiring closets. Both tight buffer and ribbon-style constructions are compatible with industry-standard connectors.

Drop Fiber Optic Cable- More Info
OFS offers compact, durable, and self-supporting drop cables in a completely dry construction. Reliable and cost-effective for the last link in the optical network, they are the ideal solution for self-supporting aerial, direct buried, and duct FTTx drop installations.

FTTx Fiber Optic Cable- More Info
OFS offers leading-edge optical cables for fiber to the home, businesses, and multiple dwelling unit deployments, that are key components of our comprehensive Access ADVANTAGE™ System.

Central Tube Fiber Optic Cable- More Info
OFS was the first optical cable manufacturer to introduce the central tube cable design, offering easy fiber access and maximum fiber density. The central tubes provide the cables with excellent optical, mechanical and environmental performance, making them suitable for a wide variety of deployments, including underground conduit and rugged direct buried applications.

Microcables and Blown Fiber Units
These microfiber fiber cables are revolutionary designs that increase the cost-effectiveness and range of deployment options for your network. These small, lightweight, and flexible fiber units help save time and money with fast and reliable microduct installation. Since fiber can be deployed only as needed, you enjoy better cost control, and can build "future-proof" networks.

Optical Ribbon
OFS has led the industry in optical fiber ribbon technology by being the first to introduce fiber ribbons in 1975, as well as the first to introduce UV-curable acrylate material ribbons in 1989. Today's optical ribbon cables hold up to 24 colored optical fibers in a planar array, providing a high fiber density unit for use in fiber optic cabling or routing inside electronic equipment.

Premises Fiber Optic Cable- More Info
Our premises Fiber Optic Cable- More Infos have a 20-year proven record. The premises distribution cable is ideal for use in systems in the central office, frame cabling environment, or FTTx. These cables are the first and only totally dry (greaseless), waterproof, tight buffered fiber optic indoor/outdoor cable in the industry, developed specifically to go from a manhole splice to the Central Office (CO) frame or from frame to frame between buildings. Our optical cordage offers outstanding performance and easy connectivity. All of our premises cable designs are fully qualified to industrially accepted specifications.

Zero Halogen Fiber Optic Cable- More Info-LSZH (Low-Smoke/Zero Halogen) -Meets low-smoke, low-toxicity standards -Round cable construction for easy handling and termination, and includes a ripcord for easy outer cable jacket removal

Fiber Optic Distribution Cable

Fiber Optic Indoor/Outdoor Cable

Fiber Optic Outdoor Cable

 

HOW TO EXTEND YOUR ETHERNET SIGNAL MORE THAN 300 FEET USING Fiber Optic Cable- More Info

Indoor Outdoor Fiber Optic Assemblies-Indoor Outdoor Cables 10 Gigabitabit Fiber Assemblies- 10 Gigabit Cables 10 Gigabitabit Fiber Optic Patch Cords - 10 Gig Patch Cords Mode Conditioning Cable Assemblies - Mode Conditioning Cables MTP Cable Assemblies - MTP Cable Assemblies Multi-Fiber Cable Assemblies - Multi- Fiber Cable Jumpers Fiber Channel Assemblies - Fiber Channel Assemblies Military- Harsh Environment Fiber Optic Assemblies- Military Fiber Optic Assemblies

 

Pre-Terminated Multi-Fiber Assemblies-Info

MTP Cassettes-Info

For Simplex Fiber Optic Assemblies Click Here

New 10 Gigabit Assemblies -Info

Info Custom Fiber Optic Trunk Cables-Designed For Co-Locations-Central Offices- Featuring single-mode and multi-mode fiber optic assemblies trunks and patch cords in Ribbon Array, DFX, Tight Buffer, and Loose Tube construction with plenum or riser jackets. Trunks are available with standard connectors or the new LC, SC, and MU single body connectors available from ConTech. Trunks may also be constructed with Loose Tube cable which results in a 30% reduction in overall cable density. Patch cords are available with standard connectors, with the new single body connectors, and in 2 channel configurations. Ribbon Array system components include external harnesses, pre-cabled patch panels, coupling blocks, and the MTP and MP connectors. Multi-mode 1 Gigabit and 10 Gigabit 50 micron trunks are available, with products tailored for the ESCON, FICON, & SAN environments-Special Orders Built and Shipped Same Day!! Call (866) 342-3721

American Tech Supply stocks a complete selection of fiber optic assemblies and fiber optic jumpers including most of the singlemode fiber optic assemblies and multimode fiber optic assmblies below. Our fiber assemblies and fiber optic patchcords are made by several leading manufacturers including Corning, Fiberconn, 3M, ADC, PCI, Draka, Commscope, ICC and others. We provide a variety of multimode fiber optic jumpers and singlemode fiber optic jumpers, fiber optic pigtails, self-loop back and custom design multi-fiber assemblies. We specialize in building custom cable assemblies to meet specific requirements and specifications. Orders received before 1pm Pacific Time are shipped the same day.

West Coast Sales (866) 342-3721--------------East Coast Sales (866) 650-3282

We specialize in building custom cable assemblies to meet specific requirements and specifications. You can choose from assorted Fiber Optic Cable- More Infos and fiber optic connectors from different manufacturers. We can terminate the fiber optic connector in many different ways, which will save you money without comprising performance. As with all of our Fiber Optic Cable- More Info assemblies, all multifiber cable assemblies are individually inspected and tested for optical performance. In addition, we provide CAD drawings to help you with the installation. You can choose from assorted Fiber Optic Cable- More Infos and fiber optic connectors from different manufacturers. We can terminate the fiber optic connector in many different ways, which will save you money without comprising performanceTo ensure the products' performance, our manufacturing process utilizes high quality fiber optic connectors with ceramic ferrules (Or Pbronze-if requested), and OFNR riser or higher graded fiber cables. Our extensive range of Fiber Optic Cable- More Info is available in 900um, 1.6mm and 3mm jacketed fiber wires terminated with state-of-the-art connectors such as ST, SC, FC, MTRJ and LC types to meet your standard or custom configurations.

Indoor Outdoor Fiber Optic Assemblies-Indoor Outdoor Cables 10 Gigabitabit Fiber Assemblies- 10 Gigabit Cables 10 Gigabitabit Fiber Optic Patch Cords - 10 Gig Patch Cords Mode Conditioning Cable Assemblies - Mode Conditioning Cables MTP Cable Assemblies - MTP Cable Assemblies Multi-Fiber Cable Assemblies - Multi- Fiber Cable Jumpers Fiber Channel Assemblies - Fiber Channel Assemblies Military- Harsh Environment Fiber Optic Assemblies- Military Fiber Optic Assemblies

Fiber Optic Field Termination Kits Click Here

LOW PRICE GUARANTEE: American Tech Supply will NOT BE UNDERSOLD. Just provide us with a written quote from any US competitor and American Tech Supply will MEET or BEAT their price! Call Us For Additional Details At (866) 342-3721

We carry a complete line of Fiber Optic Jumpers , Patch Panels, Fiber Optics Adapters, Singlemode & Multimode SC, ST, FC, LC, MTRJ Fiber Optic Jumpers, Fiber Optic Rack Mount Enclosures and Fiber Optic Enclosures.

Call Our Offices At (866) 342-3721 For Discounted Pricing and Ordering-

Always Ask For Special Project Pricing!

Fiber Optic Assemblies - Click Here - Fiber Optic Enclosures - click here

Fiber Optic Enclosures-Click Here for A Complete List & pricing

Fiber Optic Cable- More Info Home Page

(866) FIBER-21

Click On Link Below For Fiber Optic Pricing

"Don't Gamble With Quality- Buy American"

To meet the growing demand for quality fiber optic solutions, American Tech Supply offers a wide range of reliable and affordable products. As we move towards the future, our fiber manufacturer partners seek to solve problems in today's crowded telecom room and work area by providing small form factor (SFF) solutions. Our fiber work area outlet boxes fill the need for a smooth transition in bringing fiber to the desktop. The addition of fiber optic MT-RJ products in 1999, followed by the incorporation of LC products in 2001, shows our commitment to providing complete quality fiber solutions for all your needs.
Our extensive fiber optic solutions include fiber optic patch panels, adapters, distribution enclosures and boxes.ATS also offers fiber optic jumper cables for singlemode and multimode applications. Every product has been individually tested and certified to ensure that they exceed the most rigid industry specifications. Designed to save both time and money, our fiber optic solutions are versatile and competitively priced. From the telecom room to the work area, we provides dependable, cost-effective Fiber Optic Solutions.When challenged to find reliable Fiber Optic Solutions for your business or customer, turn to ATS, where
Quality Is Always Affordable.

Fiber Optic Enclosure Pricing Below----------------------------